©
American DJ
®
- www.americandj.com - Scatter Beam™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Scatter Beam™ Instruction Manual Page 3
Scatter Beam™
Precautions
• To reduce the risk of electrical shock or fire, do not expose this
unit rain or moisture
• Do not spill water or other liquids into or on to your unit
• Do not attempt to operate this unit if the power cord has been
frayed or broken
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short
• This unit is intended for internal use only, use of this product out-
doors voids all warranties written or implied.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall
• Dichoric Colored Multi-Mirrored Dish
• Easy Lamp Replacement
• Compact High-Tech Case Design
• Built-In Hanging Yoke
• Internal Microphone
• Multi-Colored Beams
• 3-Way Effects Switch - 3 Operating Modes
• Sound Active
• Bright ZB-EHJ 24v/250w Lamp
Scatter Beam™
Features
Scatter Beam™
Warranty Registration
The Scatter Beam™ carries a one year (365 days) limited warranty.
Please fill out the enclosed warranty card to validate your purchase. All
returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. The R.A.
number must be clearly written on the outside of the return package. A
brief description of the problem as well as the R.A. number must also
be written down on a piece of paper included in the shipping carton.
If the unit is under warranty, you must provide a copy of your proof
of purchase invoice. You may obtain a R.A. number by contacting our
customer support team on our toll free customer support number. All
packages returned to the service department not displaying a R.A.
number on the outside of the package will be returned to the shipper.
Scatter Beam™
Operation
Power Supply:
Before plugging your unit in, be sure the source volt-
age in your area matches the required voltage for your American DJ®
Scatter Beam™ before attempting operation.
General Operation:
Just plug this light in, and watch it go. This fix-
ture is designed to operate as a stand alone unit. It has been tested
and the lamp has been installed at the factory there is no assembly
necessary. The Scatter Beam™ is ready to be plugged in, out of
the box. There is no power switch, after plugging the unit in the unit
will immediately begin to operate according to the operating mode
selected. To change the operating mode see below.
Operating Modes:
This unit comes with a 3-way multi-operating
switch located on the bottom of the unit. The switch controls three
different sound-active operating modes.
Switch in the "I" position: Mode 1 - In this mode the two internal
dichroic colored glass dishes will rotate continuously regardless of an
audio source. The two external reflecting mirrors will only react to an
audio source via the units internal microphone.
Switch in the “O” position: Mode 2 - In this mode the two internal
dichroic colored glass dishes will remain static regardless of an audio
source. The two external reflecting mirrors will only react to an audio
source via the units internal microphone.
Switch in the “II” position: Mode 3 - In this mode both the two internal
dichroic colored glass dishes and the two external reflecting mirrors
will only react to an audio source via the units internal microphone.
Please Note:
When operating in sound-active mode, tapping on
the unit, or high pitched sounds may not trigger the unit, the unit is
designed to react to low frequencies (bass). Also note that the music
sensitivity is preset at the factory and may not be changed or adjust-
ed.
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
Scatter Beam™
General Instructions
