background image

Model: Royal 3D

Voltage:     100-240V, 50/60Hz

Power Cord Daisy Chain:  14 Fixtures Max.

Power Consumption: 

24W

Lasers:     30mW Green Diode 

 

 

 

 

350mW Violet Blue Diode

Beam Angle:   

 

90 Degrees

Dimensions:    8.75”(L) x 8”(W) x 7.75”(H)

 

 

 

 

222mm x 205mm x 194mm

Colors: 

 

 

Green & Violet Blue

Weight: 

 

 

7 Lbs. / 3.2 kgs.

Fuse: 

   7 

Amp

Duty Cycle:   

 

None

DMX:   

 

 

5 DMX Channels

Sound Active:  Yes

Working  Position:   

Any Safe, Secure Position

Warranty:     90 Days

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 

prior written notice.

 Royal 3D    

 

                              Specifications

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

©

American DJ

®

  -  www.americandj.com - Royal 3D Instruction Manual Page 23

Auto Sensing Voltage:

 This fixture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged 

into the power source.

Summary of Contents for Royal 3D













Reviews: