©
American DJ
®
- www.americandj.com - Roto-Balls™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Roto-Balls™ Instruction Manual Page 3
Roto-Balls™
Warranty Registration
Roto-Balls™
Precautions
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required volt-
age for your unit.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Please route your power cord away from foot traffic.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in the event of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the bottom cover under any conditions. There are
no user serviceable parts inside.
• Never plug this unit in to a dimmer pack
• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Do not attempt to operate this unit if it becomes damaged in any way.
• Never operate this unit when it’s front cover is removed.
• To reduce the risk of electrical shock or fire, do not expose this unit
rain or moisture
• This unit is intended for indoor use only, use of this product out-
doors voids all warranties.
• During long periods of non-use, disconnect the unit’s main power.
• Always mount this unit in safe and stable matter.
• Power-Cord Protection - Power-supply cords should be route so
they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords a plugs,
convenience receptacles, and the point where they exit from the
fixture.
• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer.
• Heat -The fixture should be situated away from heat sources such
as radiators, heat registers, stoves, or other appliances (including
amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The fixture does not appear to operate normally or exhibits a
marked change in performance.
Roto-Balls™
Features
Every Roto-Balls™ has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your unit
for damage and be sure all accessories necessary to operate the
unit have arrived intact. In the event damage has been found or
parts are missing, please contact our toll free customer support
number for further instructions. Please do not return this unit to
your dealer without first contacting customer support.
Roto-Balls™
Unpacking
The Roto-Balls™ carries a 90 day limited warranty. We recom-
mend you fill out the enclosed warranty card to validate your
purchase. All returned service items whether under warranty or
not, must be freight pre-paid and accompany a return autho-
rization (R.A.) number. If the unit is under warranty, you must
provide a copy of your proof of purchase invoice. Please con-
tact American DJ® customer support for a R.A. number.
• 104 Vibrantly Colored Beams.
• Adjustable Speed Knob (4 settings)
• Reverse Switch
• Easy Lamp Replacement.
• Air Cooled.
• Light Weight, Compact Case Design.
• Built-In Mounting Plate.
• Bright LL-200 or LL-200/2 (200 Watt Lamp).
• Low Power Consumption.
