American DJ
®
- www.americandj.com - Revo XPress Instruction Manual Page 15
Revo XPress
Cleaning
Revo XPress
Trouble Shooting
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the external fuse has not blown. The fuse is located on
the rear panel of the unit under I.E.C. plug.
2. Be sure the fuse holder is completely and properly seated.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may
not activate the unit.
Fixture Cleaning:
Due to fog residue, smoke, and dust cleaning the
internal and external optical lenses and mirror should be carried out
periodically to optimize light output. Cleaning frequency depends on
the environment in which the fixture operates (I.e. smoke, fog residue,
dust, dew). In heavy club use we recommend cleaning on a monthly
basis. Periodic cleaning will ensure longevity, and crisp output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Clean the external optics and mirror with glass cleaner and a soft
cloth every 20 days.
3. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
4. Always be sure to dry all parts completely before plugging the unit
back in.
Revo XPress UC3 Control
Revo XPress
256 Channel Mode
Blackout Blackout the unit
Function
1. White Strobe
2. Color Strobe
3. Sound White Strobe
4. Sound Color Strobe
Select Show
(Show 1-12)
Select Color
(Color 1-15)
Select Speed
1. Fast
2. Middle
3. Slow
Mode
Sound/Strobe
(LED OFF)
Show
(LED ON)
LED slow blinking LED fast blinking
American DJ
®
- www.americandj.com - Revo XPress Instruction Manual Page 16
Revo XPress
Fuse Replacement
Remove the unit’s power cord. Once the cord has been removed the
fuse holder is located inside/under the power socket. Insert a flat-head
screw driver into the power socket and gently pry out the fuse holder.
Remove the bad fuse and replace with a new one. The fuse holder has
a built-in socket for a spare fuse be sure not to confuse the spare fuse
with active fuse.
