background image

American DJ

®

 

4295 Charter Street

Los Angeles CA. 90058

www.americandj.com

8/07

User Instructions

American DJ

®

  -  www.americandj.com  - Revo Roll LED™ Instruction Manual Page 2

Unpacking: 

Thank you for purchasing the Revo Roll LED™ by Ameri-

can DJ

®

. Every Revo Roll LED™ has been thoroughly tested and has 

been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Please do not return this unit to your dealer without con-

tacting customer support first. 

Introduction: 

The  Revo  Roll  LED™  is  a  four  channel,  DMX  intelli-

gent LED fixture. The fixture can operate in three different operating 

modes; stand alone, sound-active, or in a Master/Slave configuration. 
The Revo Roll LED™ comes with several built in programs. When used 
as  a  stand  alone  unit  or  when  used  in  multiples  linked  in  a  master/
slave configuration. 

For best results use fog or special effects smoke 

to enhance the beams projections. 

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 

5:00 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

  Revo Roll LED™         

                             General Information

Summary of Contents for Revo Roll LED









Reviews: