RADD™ Features
Congratulations and thank you for purchasing the American DJ “RADD,”
one of the finest pieces of its kind on the market today! The RADD
is a great inexpensive, light weight, mini intelligent fixture. Due to it’s
physical specifications, it’s a great piece for mobile DJ’s, roller rinks,
small clubs, bars, and bowling centers. When used in multiples of two
(2) or more, these units create an effect that rivals that of units that can
cost up to three times the price. The RADD™ was designed to run in
master/slave mode but can be used with a standard dmx controller. The
RADD features a bright 150 watt/500 Hr lamp life halogen bulb
with a separate gobo and color wheel. The color wheel features seven
brilliant colors plus white and the gobo wheel features 9 gobos plus a
large and small spot. This units is ready to be installed or hung and
powered right out of the box. There is no assembly required. This fixture
incorporates the use of high quality stepper motors for a more accurate
mirror movement. Mirror movement allows for a full 90 degree tilt
(vertical) and a full 90 degree pan (horizontal). An internal built in
microphone allows the fixtures to run in Stand Alone mode so there is
no need for an external controller. The RADD™ may also be set-up to
run in a Master-Slave mode when used in multiples, up to 16 units. When
used in the Master-Slave mode, the unit will chase to several internal
programs. The RADD™ can also be controlled via a standard DMX
controller such as the American DJ Show Designer,
™
or the American
DJ
®
DMX Operator,
™
giving the user independent control over the gobo
and color wheel as well as the mirrors pan and tilt movements.
Note: The built in programs in the RADD are so good you may never
need a DMX controller.
©
American DJ Supply
®
www.americandj.com Radd™ Instruction Manual Page 3
• Do not spill water or other liquids in to or on to your unit.
• Be sure that the local power outlet matches the required voltage
for your fixture.
• Do not attempt to operate this unit if the power cord has been frayed
or broken. Please route your power cord out of the way of foot
traffic.
• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the top cover under any conditions. There are no user
serviceable parts inside.
• Disconnect the unit’s main power when left unused for long periods
of time.
• Never connect this unit to a dimmer pack
• Always be sure to mount this unit in area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.
• Never block the ventilation holes.
• Do not attempt to operate this unit, if it becomes damaged in
any way.
• Never operate this unit when it’s cover is removed.
RADD™ Warnings
Please read and understand the instructions in this manual carefully and
thoroughly before attempting to operate this unit. These instructions con-
tain important information regarding safety during use and maintenance.
Please keep this manual with the unit for future reference.
RADD™ General Instructions
©
American DJ Supply
®
- www.americandj.com - Radd™ Instruction Manual Page 4
