American DJ
®
- www.americandj.com - Quad Gem DMX™ Instruction Manual Page 10
American DJ
®
- www.americandj.com - Quad Gem DMX™ Instruction Manual Page 9
2. Tap the UP or DOWN buttons to scroll through 12 sound
active shows.
3. Select your desired show by pressing the ENTER button to
confirm and exit.
BLND -
Blackout or Stand by mode.
1. Tap the either the MENU button until “
BLND
” is displayed,
press ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until Yes is
displayed, press ENTER to confim and exit. The fixture will now
be in Blackout mode. To deactivate Blackout mode, select No
and press Enter.
LED -
With this function you can switch the LED on or off
via the control board.
1. Tap the either the MENU button until “
LED
” is displayed,
press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to switch on the LED, or “
OFF
” to
switch off the LED.
3. Press ENTER to confirm and exit.
I DSP
-
This function will reverse the display 180º.
1. Tap the either the MENU button until “
I DSP
” is displayed,
press ENTER.
2. Press the UP button to select “
DSP i
” to activate this function,
or “
I DSP
” to deactivate this function.
3. Press ENTER to confirm.
FHRS
- With this function you can display the running time
Quad Gem DMX™
System Menu
of the unit.
1. Tap the either the MENU button until “
FHRS
” is displayed,
press ENTER.
2. The display shows the running time of the unit. Press MENU
to exit.
VER
- Use this function to display the Software version of
the unit.
1. Tap the either the MENU button until “
VER
” is displayed,
press ENTER.
2. The display will show the software version.
Quad Gem DMX™
System Menu
Quad Gem DMX™
System Menu
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 17 fixtures maximum. After 17 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
