1. OPENING AND CLOSING THE DISC TRAY AND LOADING DISCS
•
This operation only works when the power is on.
• Press
the
OPEN/CLOSE BUTTON (4) to open or close the disc tray, or, Press PLAY BUTTON (11) to close
the tray automatically when it is open.
•
If the tray is not closed after 60 seconds it will close automatically and go into pause mode.
•
The disc trays cannot be opened during playback to prevent playback from being interrupted if the OPEN/
CLOSE BUTTON (4) is pressed accidentally. Stop playback, then press the OPEN/CLOSE BUTTON (4)
2. LOADING DISCS
•
Hold the disc by the edges and place it in the disc tray. Do not touch the signal surface (the glossy side).
•
When using 5 inch/12 cm discs, place the disc in the outer tray guides and when using 3 inch/8 cm discs, place
them securely in the inner guides.
CAUTION:
•
DO NOT place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a time.
Doing so may result in malfunction.
•
DO NOT push the disc tray in manually when the power is off, as this may result in malfunction and damage the
player.
3. SELECTING TRACKS
•
Select desired track using NUMBER BUTTON (1) or
•
Press the TRACK BUTTONS (5A/5B) once to move to one higher or lower track or
•
Hold the TRACK BUTTONS (5A/5B) in to change tracks continuously at a higher speed.
•
When a new track is selected during playback, playback begins as soon as the search operation is completed.
4. STARTING PLAYBACK
•
Press the PLAY/PAUSE BUTTON (11) during the pause or cue to start playback.
•
The PLAY INDICATOR (30) lights when playback starts.
•
The point at which playback starts is automatically stored in the memory as the cue point. The pickup then
returns to the cue point (the point at which playback started) when the CUE BUTTON (9) is pressed.
5. STOPPING PLAYBACK
•
There are two ways to stop playback.
1) Press the PLAY/PAUSE BUTTON (11) during playback to pause at that point.
2) Press the CUE BUTTON (9) during playback to return to the position at which playback started.
6. PAUSING
•
Press the PLAY/PAUSE BUTTON (11) to switch between play and pause.
•
The PAUSE INDICATOR (38) lights when the pause mode is set.
7. CUEING
•
“Cueing” is the action of preparing for playback. When the CUE BUTTON (9) is pressed, playback returns to
the cue point and enters pause mode. When the PLAY/PAUSE BUTTON (11) is pressed during the cue mode,
playback starts.
•
CUE POINT SETTING:
A
Playback starts from pause or skip to a new track during play or pause. The beginning play point will be set to
the cue point.
B
Or, Press the IN BUTTON (5a) button during playback to set the new cue point.
C
Or, Save up to 10 CUE points by pressing MEMORY, then set desired Cue, then press any of DIRECT TRACK
ACCESS BUTTONS (1). You can also set any of the 10 Cue points by pressing MEMORY then any of the
DIRECT TRACK ACCESS BUTTONS (1) above the LED screen.
•
To return to a CUE POINT press CUE BUTTON (9). This will return to point A or B above. The player has
completed the cue or pause operation and is waiting for the play start command. When the PLAY/PAUSE
BUTTON (11) is pressed, playback starts.
•
To Return to any of the 10 Cue points, press RECALL (3), then the desired DIRECT TRACK ACCESS BUT-
TONS (1). The player has completed the cue or pause operation and is waiting for the play start command.
When the PLAY/PAUSE BUTTON (11) is pressed, playback starts.
•
To recall cues, if the recall LED is lit you can press the last number button cue stored and create a BOP
EFFECT. The last cue that was stored or recalled will flash in the LED screen to let you know It was last
cued up.
NOTE: When play starts via pause or track skipping or scanning, the CUE POINT will change to the start point auto-
matically.
BASIC OPERATIONS
American DJ
®
AUDIO • PRO-DJ2 INSTRUCTIONS MANUAL • PAGE 8
