background image

User Instructions

©

American DJ

®

 - www.americandj.com - Penta Beam™ Instruction Manual Page 2

Unpacking:

 

Thank you for purchasing the Penta Beam™ by Ameri-

can  DJ

®

.  Every  Penta  Beam™  has  been  thoroughly  tested  and  has 

been shipped in perfect operating condition. Carefully check the ship-
ping  carton  for  damage  that  may  have  occurred  during  shipping.  If 
the carton appears to be damaged, carefully inspect your unit for any 
damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 

instructions. Please do not return the unit to your dealer without first 

contacting customer support. 

Introduction:

 

The Penta Beam™ is a unique six channel, DMX intel-

lingent red laser effect that creates several different patterns. The unit 

uses five lasers to project several patterns over a wide area. This unit 

can be used as a stand alone, sound-active unit or in a Master/Slave 

configuration. The unit can also be controlled via DMX controller.  The 

unit’s sound sensitivity may be adjusted by a sensitivity knob on the 
rear of the unit. When used as a stand alone unit or when used in mul-

tiples linked in a master/slave configuration the optional MINI/C con

-

troller may be used. The optional controller will control the blackout 
function. 

For best results use fog or special effects smoke to enhance 

the beams projections.

Customer  Support:

 

American  DJ

®

  provides  a  toll  free  customer 

support line, to provide set up help and to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. For service related issue please contact Ameri-
can DJ

®

. Service Hours are Monday through Friday 9:00 a.m. to 5:00 

p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2610

 

E-mail:  

[email protected] 

To purchase parts online visit http://parts.americandj.com

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ customer support.

Please recycle the shipping carton when ever possible.

Rev. 11/09

 Penta Beam™  

 

 

 

General Introduction

American DJ

®

Summary of Contents for Penta Beam













Reviews: