background image

•  Be sure to save the packing carton in the unlikely event the unit 
  may have to be returned for service
•  Do not spill water or other liquids into or on to your fogger. Be

  sure that all the fog fluid is kept inside the fluid reservoir

•  Be sure that the local power outlet match that or the required 
  voltage for your fog machine
•   Do not remove the top cover under any conditions. There are no
  user serviceable parts inside
•   Disconnect the unit’s main power when left unused for long peri- 
  ods of time
•  Never connect this unit to a dimmer pack
•   Do not attempt to operate this unit, if it becomes damaged in anyway
•  Never operate this unit when it’s cover is removed

•  To reduce the risk of electrical shock or fire, do not expose this 

  unit rain or moisture
•  Do not attempt to operate this unit if the power cord has been fray-
  ed or broken. Do not attempt to remove or break off the ground
  prong from the electrical cord. This prong is used to reduce the  

  risk of electrical shock and fire in case of an internal short

•  Disconnect from main power before making any type of connection
•  Never block the ventilation holes. Always be sure to mount this 
  unit in an area that will allow proper ventilation. Allow about 6” 
  (15cm) between this device and a wall
•  This unit is intended for indoor use only, use of this product out- 
  doors voids all warranties
•  Always mount this unit in a safe and stable matter

•  Please route your power cord out of the way of foot traffic. Power 

  cords should be routed so they are not likely to be walked on, 
  pinched by items placed upon or against them
•  The unit should only be serviced by qualified service personnel 
  when:
   

A. The power-supply cord or the plug has been damaged.

   

B. Objects have fallen, or liquid has been spilled into the unit.

   

C. The unit has been exposed to rain or water.

   

D. The appliance does not appear to operate normally or 

   

     exhibits a marked change in performance.

  MINI FOG™  

 

 

       Safety Precautions

  MINI FOG™  

 

 

 

 

  Description

©

American DJ Supply

®

   - MINI FOG™ Instruction Manual Page 3

The  new  MINI  FOG™  includes  a  revolutionary  new  heating  ele-
ment that has been specially designed to prevent excessive particle 
build  up  that  can  cause  premature  fogger  failure.  This  fog  machine 
includes a wide-angle spray nozzle and long-life pump that was spe-
cially designed for high performance fogger output. The fog machine 
also  includes  a  10  foot  (three  meters)  remote  control,  that  may  be 
removed  during  periods  on  non-use.  When  the  remote  is  not  con-
nected the fog machine may be manually operated by function switch 
located on the top of the unit.

©

American DJ Supply

®

   - MINI FOG™ Instruction Manual Page 4

  MINI FOG™  

 

 

 

 

 

Set-Up

1. Open the shipping carton and carefully remove the unit from the  
  shipping carton.
2. Be sure to remove all the packing material especially around the  
  nozzle.
3. Set the fog machine on a flat dry surface and remove the reservoir  
  cap located on the top of the machine. 

4. Remove the supplied bottle of American DJ

®

 

branded fog juice  

  from the carton. Fill the fog machine reservoir with the fog juice  
  and replace the cap.
5. Remove the remote control from the carton. Firmly attach the    
  remote control to the remote control socket located on the rear  
  unit.
6. Plug the unit in to a matching power supply and flip the power  
  switch to the on position. Wait approximately five minutes for the  
  fogger to reach normal operating temperature.
7. Follow the operating instructions on the next page for proper    
  operation.

  MINI FOG™  

 

 

 

 

      Features

•  400 Watt Heater Core
•  Remote Control Operation
•  Light Weight & Portable
•  500ml Tank
•  Low Power Drawl
•  Output Button on Unit

Reviews: