©
American DJ® - www.americandj.com - Mega Tri Bar™ Instruction Manual Page 8
©
American DJ® - www.americandj.com - Mega Tri Bar™ Instruction Manual Page 7
LED Display On/Off:
To make the display stay ON all of the time
press the MODE and
UP buttons at the same time. To make the dis-
play turn OFF after 20 seconds, press the MODE and DOWN buttons
at the same time.
Operating Modes:
Dimmer Mode:
In this mode you can adjust RGB colors to make your desired color.
1. Plug the fixture in and press the MODE button until “CoLr” is dis-
played.
2. Press the SET UP button to enter the RGB mode. Adjust the RGB
colors using the UP and DOWN buttons. Press SET UP to move on
to the next color in the RGB mode.
Program Mode:
In this mode you can run 1 of 14 built-in progrmas.
1. Plug the fixture in and press the MODE button until “Pr.XX” is dis-
played, “XX” = 01-14.
2. Press the UP or DOWN buttons to find your desired and program
and press SETUP. The programs and controls are listed below.
• Pr.01 is static color program. There are 7 colors to choose from.
Press the SET UP button to enter the static color submenu. Use
the UP or DOWN buttons to scroll through the static colors.
• Pr.02 - Pr.12 are programs where the programs speed or fade time
can be adjusted. Both modes cannot work at the same time.
Note: You must have Program speed set to the lowest speed if
you want to run the fade mode.
Select your desired program and press the SET UP button.
“SP.XX” will be displayed, this is the program speed. You can ad-
just the speed from 01-99. 01 being the slowest, and 99 being the
fastest.
Press SET UP again, and “FD.XX” will be displayed, this is the fade
time. You can adjust the fade time from 01-99. 01 being the slow
est, and 99 being the fastest.
• Pr.13 - Pr.14 are programs where the program speed or fade time
can be adjusted, and also the color(s) can be selected.
Select your desired program and press the SET UP button.
“SP.XX” will be displayed, this is the program speed. You can ad-
Mega Tri Bar™ Operating Instructions
just the speed from 01-99. 01 being the slowest, and 99 being the
fastest.
- Press the SET UP button again to adjust the Fade speed.
“FD.XX” will be displayed, this is the fade time. You can adjust the
fade time from 01-99. 01 being the slowest, and 99 being the fast-
est. Press the SET UP button to enter one of two color adjust-
ment modes. Use the UP or DOWN buttons to scroll through the
differnet color selections. You can also press the SET UP button
again to enter another color adjustment mode.
-
Press the SET UP button to choose your color(s). The first set of
colors are controlled by the program speed. When you press SET
UP again you will find a second set of colors, these are controlled
by the fade speed. One set of colors must be set to off for the your
chosen program to work.
Example: if your running the first set of colors (program speed) then
the second set of colors (fade program) must be set to off.
Auto Mode:
1. Plug the fixture in and press the MODE button until “AUTO” is
displayed. A factory program will now run. The run (loop) of the pro-
gram can be adjusted by pressing SET UP and then using the UP
and DOWN buttons to adjust the loop amount.
Example: If “n.003” is set for the loop, the unit will run each program
3 times.
Sound Active Mode:
In this mode the Mega Tri Bar™ will react to sound, changing and fad-
ing through the different colors.
1. Plug the fixture in and press the MODE button until “SU.XX” is dis-
played, press SETUP. “XX” = 00-31 which is adjustable sound sen-
sitivity levels.
2. The fixture will now change via sound. You can adjust the sound
sensitivity by pressing the UP and DOWN buttons. The sound sen-
sitivity can be adjusted from 00 - 31, 00 being the least sensitive,
and 31 being the most sensitive.
Master-Slave Operation:
This function will allows you to link units together to run in a Master-
Slave mode. In Master-Slave operation one unit will act as the con-
Mega Tri Bar™ Operating Instructions
