©
American DJy
®
- www.americandj.com - Mega Panel LED™ User Manual Page 10
©
American DJ
®
- www.americandj.com - Mega Panel LED™ User Manual Page 9
Mega Panel LED™ Operating Instructions
the colors to find your desired color. Press the SETUP button when
you are finished, to go to the next feature adjustment. “2” will be
displayed you are now adjusting the second color of the color flow.
Use the UP or DOWN buttons to adjust. Scroll through the colors to
find your desired color. Press the SETUP button when you are fin-
ished, to return to the Program menu.
NOTE: This adjustment is
only available with Programs 13-14
.
Auto Mode:
1. Plug the fixture in and press the MODE button until AUTO is dis-
played. You are now in AUTO mode and the fixture will now cycle
through the built in programs.
2. Press the UP or DOWN buttons to adjust the “frequency” or speed
the auto mode runs.
Sound Active Mode:
In this mode the Mega Panel LED™ will react to sound, and chase
through the different colors. There are two sound active modes to
choose from.
1. Plug the fixture in and press the MODE button until SOUND is dis-
played
.
The fixture will now change color via sound.
2. You can press the UP or DOWN buttons to adjust the sound sensi-
tivity level.
The sensitiviey can be adjusted from “SENS.00” the
least sensitive, to “SENS.31” the most sensitive.
RGB Mode:
In this mode you can select either red, green, blue, or adjust the col-
ors to make a deisred color, which will remain static. Adjust the inten-
sity of each color to make your desired color..
1. Plug the fixture in and press the MODE button until “COLR” is dis-
played.
2. Press SETUP to scroll through the colors. Press the UP or DOWN
buttons to adjust the intensity of the displayed color. When you
have adjusted your desired color press SETUP to scroll to the next
color.
DMX Mode:
There are eight DMX Modes to choose from: 2 Channels, 3 Channels,
4 Channels, 5 Channels, 6 Channels, 7 Channels, 14 Channels, or
26 Channels. Operating through a DMX controller give the user the
freedom to create their own programs tailored to their own individual
needs.
1.
This function will allow you to control each individual fixture’s
traits with a Elation
®
DMX 512
Controller.
2. To run your fixture in DMX mode, plug in the fixture via the XLR
connections to any standard DMX controller.
3. Press the MODE button until DMX MODE: ADDR is displayed.
Press the UP or DOWN buttons to select your desired address.
Once you have set your desired DMX address press the SETUP
button to to choose your desired DMX mode.
4. When you press the SETUP button DMX MODE: MODE should be
displayed. Press the UP or DOWN buttons to select your desired
DMX mode.
The Modes go as follows:
DMX MODE 1 is 3 Channel mode,
DMX MODE 2 is 4 Channel mode, DMX MODE 3 is 14 Channel
mode, DMX MODE 4 is 26 Channel mode, DMX MODE 5 is 2
Channel mode, DMX MODE 6 is 7 Channel mode, DMX MODE
7 is 5 Channel mode, and DMX MODE 8 is 6 Channel mode.
5. Please see pages 11-20 for DMX values and traits.
Mega Panel LED™ Operating Instructions
