![background image](http://html1.mh-extra.com/html/american-dj/majestic-led/majestic-led_user-instructions_2922775007.webp)
American DJ
®
- www.americandj.com - Majestic LED Instruction Manual Page 13
American DJ
®
- www.americandj.com - Majestic LED Instruction Manual Page 14
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-
512
controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Majestic LED has two DMX channel mode and a 8 DMX
channel mode. To set the channel mode see page 8. See pages
15-16 for detailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are
included with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 8 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Show Mode:
This mode allows a single unit or several units linked
together, to run your desired factory show.
1. Tap the MENU button until
“
SHND
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttons until you find your desired show,
and press ENTER, and then press and hold the MENU button to
confirm.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Sound Active:
This mode allows a single unit or several units linked
together, to run to the beat of the music.
1. Tap the MENU button until
“
SOUN
” is displayed, and press
ENTER.
2.
Tap the UP or DOWN buttonS until you find your desired show,
and press ENTER.
3. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Master-Slave Operation:
This function will allow you to link up to 16
units together and operate without a controller. The units will be sound
Majestic LED
Operation
Majestic LED
Operation
activated. In Master-Slave operation one unit will act as the controlling
unit and the others will react to the controlling units programs. Any unit
can act as a Master or as a Slave.
1. Using standard XLR microphone cables, daisy chain your units
together via the XLR connector on the rear of the units. Remem-
ber the Male XLR connector is the input and the Female XLR
connector is the output. The first unit in the chain (master) will use
the female XLR connector only - The last unit in the chain will use
the male XLR connector only. For longer cable runs we suggest a
terminator at the last fixture.
2. On the Master unit find your desired show and set that show by
pressiing the ENTER button.
3. On the slave units
tap the MENU button until “
SLND
” is dis
played, and Press ENTER.
4
. The slave units will now follow the Master unit.
5. The optional
UC3 Controller
(not included)
may be used to con-
trol different functions including blackout.
Majestic LED
Power Cord Daisy Chain
With this feature you can connect the fixtures to one another
using the IeC input and output sockets. The quantity that can be
connected is 12 fixtures maximum. After 12 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Majestic LED UC3 Control
Stand By
Blackout the unit
Function
1. synchro Strobe
2. Sound strobe
3. Asynchro strobe
Select Pattern
1-15
Select show
1-8
Mode
Sound (LED OFF)
LED ON
LED blinking