American DJ
®
- www.americandj.com - Majestic LED Instruction Manual Page 10
American DJ
®
- www.americandj.com - Majestic LED Instruction Manual Page 9
Majestic LED
System Menu
n-Board System Menu.
The Majestic LED comes with an easy to
navigate system menu. This next section will detail the functions of
each command in the system menu.
Please read the next section
thoroughly!
To access the main menu press the MENU button. Tap the UP or DOWN
buttons until you reach function you wish to change. When you reach
the function you wish to change press the ENTER button
.
When a
function is selected use the
UP or DOWN buttons to change the func-
tion settings. Once your changes are made press the ENTER button,
and then press and hold the MENU button for at least three seconds
to confirm and lock the change into the system memory. If the
MENU
button
is not pressed and held within eight seconds the fixture will
automatically confirm and lock the change into the system memory. To
exit without making any changes press the MENU
button.
ADDR -
DMX Address Setting
.
1. First set the unit to your desired DMX Channel mode.
2. To set your address, tap either the MENU, UP, or DOWN
buttons until “
ADDR
” is displayed, press ENTER. “
1
” will now be
displayed and flashing.
3. Connect your DMX controller. Press the UP or DOWN but-
tons to find your desired address. Press and hold the MENU
button for at least 3 seconds to set your desired DMX address.
CHND -
This will let you switch between 2 Channel DMX
mode and 8 Channel DMX mode.
1. Tap the either the MENU button until “
CHND
” is displayed,
press ENTER. Either “
2CH
” or “
8CH
” will be displayed
2. Tap the UP or DOWN buttons to choose your desired DMX
mode and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the either the MENU button until “
SLND
” is displayed,
press ENTER. “
MSTR
”, “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, then press ENTER, and then press and hold the
MENU button for at least 3 seconds to confirm.
NOTe:
In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to “SL 2”, the
fixtures will now have contrast movement to each other.
SHND: SH
1
-
SH
8
- Show modes 0-8
For Show Mode to run properly make sure Sound Active Mode
is off.
1. Tap the MENU button until “
SHND
” is displayed, press
ENTER.
2. “
SH
X
” will now be displayed, “X” representing a number
between 0-8. Programs 1-8 are preset shows, while “
SH
0
” is
random mode. Press the UP or DOWN buttons to find your
desired show. Press ENTER and then press and hold the MENU
button for 3 seconds to confirm.
SOUN
- In this mode you can run the unit in sound active
mode
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. Either “
ON
” or “
OFF
” will now be displayed. Press the UP or
DOWN buttons to select one or the other.
3. Press ENTER, and then press and hold the MENU button for
at least 3 seconds to confirm.
Majestic LED
System Menu