Factory Default Reset
(1) Switch the LED Operators main power OFF.
(2)Press and hold down
buttons 1, 6 & 8 then
simultaneously switch the power switch ON then release all
buttons. A
Color Preset
ll LED indicators will flash three times to confirm that
factory settings have been restored.
(3) Press the "STROBE" button again to disengage the strobe effect.
(2) At any time, you can adjust the Strobe flash rate by pressing and
holding down the "Strobe" button then manually adjusting the Speed fader.
SPEED
0.1S
10Min
+
+
The strobe function will mix with a running Color Preset or Chase. Pressing the Strobe button will temporarily
incorporate a strobe effect over a running color preset or chase.
(1) Press the "STROBE" button when effect is desired.
Strobe Function
WARNING! THIS OPERATION WILL ERASE CURRENT COLOR PRESETS AND CHASES. ALL COLOR
PRESETS AND CHASES WILL BE REPLACED WITH FACTORY COLOR PRESETS AND CHASES.
-5-
