Color Preset and Chase Playback
1. Adjust the Red, Green, Blue & Master faders to set
a scene on the fly as desired.
2.
You can also manually adjust the RED, GREEN and BLUE
faders to temporarily edit the current color. Adjust the
fader to set the overall output intensity.
Select a
by pressing buttons 1-8 in the Color Presets section. Press the
button to switch between color preset pages 1 and 2. When
LED indicator illuminates, color
presets 1-8 are accessible; when
LED indicator illuminates, color presets 9-16 are
accessible. When a color preset is selected, its LED indicator will continually flash. Press the same
color preset number button to disengage it.
“Color Preset”
"PAGE"
"PAGE1"
"PAGE2"
"MASTER"
3. Select a
" by pressing buttons 1-8 in the Chases section. When a chase is selected, its
LED indicator will flash continually. Additional chases can be selected and will playback in a sequential
fashion. When additional chases are selected, each relevant Chase LED will illuminate ON solid until
it becomes its turn to playback in the sequence. Pressing a selected chase button a second time will
disengage the relevant chase. Adjust the “MASTER” fader to set the overall output intensity.
"CHASE
Operating Instructions:
(1) Connect from your controllers DMX output to the DMX input of your first LED fixture in line.
(2) BLACKOUT mode is active by factory default. When first powering on LED Operator, the
LED indicator should be OFF.
"BLACKOUT" LED
indicator will illuminate. Press the "BLACKOUT" button once to disengage. The
(3) After the first use, LED Operator will default to its last state before being shut off.
-2-
