American DJ
®
- www.americandj.com - LED Beam Scan Instruction Manual Page 10
American DJ
®
- www.americandj.com - LED Beam Scan Instruction Manual Page 9
LED Beam Scan
System Menu
System Menu: When making adjustments you can press
ENTER to confirm your setup or you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
”
is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
CHND
- This will let you select your desired DMX Channel
mode. There are two channel modes to choose from 3 Chan-
nel mode and 5 Channel mode.
1. Tap the MENU button until “
CHND
” is displayed, press
ENTER.
2. “
X CH
” will now be displayed, “X” represents the displayed
DMX channel mode. Press the UP or DOWN buttons to find your
desired Channel mode.
3. Press ENTER, and then press and hold the MODE button
for at
least three seconds
to confirm.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE:
In a Master/Slave configuration you can set one fixture
to Master and then set the next fixture to “
SL 2
”, the fixtures will
now have contrast movement to each other.
SHND -
This will let you choose one of the four prepro-
grammed shows. See show descriptions below.
1. Tap the either the MENU button until “
SHND
” is displayed,
press ENTER. Either “
SH 1
”, “
SH 2
”, “
SH 3
” or “
SH 4
” will be dis-
played.
2. Tap the UP or DOWN buttons to find you desired show and
then press ENTER to confim and exit.
PAN -
Pan Inversion
1. Tap the MENU button until “
PAN
” is displayed, press ENTER.
Either “
NO”
or “
I”
will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until
I
is displayed, press ENTER to confim. To deactivate Pan
inversion, select
NO
and press Enter.
MANU
- With this function you can manually test the indi-
vidual features.
1. Tap the MENU button until “
MANU
” is displayed, press
ENTER.
2. Press the UP or DOWN buttons to find and manually test
the individual features. Press ENTER when you have found the
feature you want to test.
SOUN -
Sound Active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
LED Beam Scan
System Menu
