background image

Please Note:

 Specifications and improvements in the design 

of this unit and this manual are subject to change without any 
prior written notice.

 LED Beam Scan                                  Specifications

American DJ

®

 

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.americandj.com / E-mail: [email protected]

Model:    

 

LED Beam Scan

LED:

   

 

 

1 x 3W

Voltage:

 

 

 

100V~240V  50/60Hz  

Power Consumption: 

11W

Fuse:

   

 

 

7 Amp 

Power Cord Daisy Chain: 

48 Fixtures Max.

Dimensions: 

 

 

6.7”(L) x 6.2”(W) x 7.1”(H)

 

 

 

 

172mm x 157mm x 182mm

Weight:

 

 

 

2.8 Lbs. / 1.3 kgs.

Duty Cycle:

   

 

None

DMX: 

 

 

 

3 or 5 DMX Channels

Colors: 

 

 

White

Sound Active:

 

 

Yes

Working  Position:

   

Any Safe, Secure Position

Warranty:

 

 

 

3 Year (1095 days)

American DJ

®

  -  www.americandj.com  - LED Beam Scan Instruction Manual Page 19

Auto Sensing Voltage:

 This fixture contains a electronic bal

-

last, which will auto sense the voltage when it is plugged into the 
power source.

Summary of Contents for LED Beam Scan











Reviews: