SPECIFICATIONS:
Diode: 5 mW,
Weight 3 lbs.,
Dimensions: 10.5” x 4.5” x 4.5”
Supply Voltage:9VDC With supplied AC
120V adapter or AC 240V adapter must be
500ma min. or 4 C batteries(not supplied)
Wireless remote uses 2AA batteries
(Supplied)
Operating Instructions:
14.
3P Infrared Receiving Sensor socket
13.
Series Control Left Input , Right Output
12.
Function Mode (4) may be selected for Auto or Music Modes. NOTE: Must be selected
before turning on unit but it can be defeated by remote control.
Auto Mode:
24 pre-set geometric patterns to be executed in regular order.
Music Mode:
24 pre-set geometric patterns to executed in regular order, speed
is controlled by built-in microphone.
Additional Safety Notes: This is a laser product, please avoid direct eye exposure.
Take out all the batteries to avoid humidity damage. Do not expose this product
to high temperature or high humidity area.
Remote Control:
The Laser-4800 Comes with a remote control which allows you to control the speed,
type of design, music, manual or auto modes, and by pressing static and adjust dynamic but-
tons multiple times,or then pressing (+) (-) buttons and holding them down you can alter most
of the existing geometric patterns.
Master / Slave:
The Laser-4800 can be used in a master /slave configuration using cable available
from
American DJ®.
The only precautions are to observe the in and out configuration , and
cable should not exceed 300’.
Additional Safety Notes: This is a laser product, please avoid direct eye exposure. Take out
all the batteries, when not in use, to avoid humidity damage. Do not expose this product to
high temperature or humidity .
Caution!
No user serviceable parts inside do not attempt repairs. In the event your unit should fail, con-
tact your
American DJ®
dealer
.
™
American DJ
®
16. 24 Geometric Pattern
presets
17. Mode select
18. Static Dynamic
19. Adjust Dynamic
(pulsating image)
20. + ,- adjustments
21. Standby,
22. Emission indicator switch
23. Shutter control switch
16
17
18
19
20
21
22
23
