ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 13
ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 14
TEST
- This function will run a self test program. The test
program will test pan/tilt movement and colors.
1. Press the MENU button until “
TEST
” is displayed, press ENTER.
2. The fixture will now run a self test.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “
TEMP
” is displayed, press ENTER.
2. The temperature of the fixture will now be displayed. Press MENU
to exit.
FHRS
- With this function you can display the running
time of the unit.
1. Press the MENU button until “
FHRS
” is displayed, press ENTER.
2. The running time of the fixture will now be displayed. Press MENU
to exit.
VER
- With this function you can display the version soft-
ware of the unit.
1. Press the MENU button until “
VER
” is displayed, press ENTER.
2. The software version will now be displayed. Press MENU to exit.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “
RSET
” is displayed, press ENTER.
2. The fixture will now reset.
Inno Spot LED
System Menu
Inno Spot LED
System Menu
To enter the OTIL (Home position adjustment) & Gobo wheel adjust-
ment submenu, press the ENTER button for at least 5 seconds. In
this submenu you are able to adjust the original position of the gobo
wheel and tilt (home position).
OTIL
- Adjustment of the home position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “
OTIL
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
OGOB
- Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “
OGOB
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
MENU
