![background image](http://html1.mh-extra.com/html/american-dj/inno-spot-led/inno-spot-led_user-instructions_2923113010.webp)
ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 19
ADJ Products, LLC - www.adj.com - Inno Spot LED Instruction Manual Page 20
Inno Spot LED
Photometric Chart
Inno Spot LED
Gobo Replacement
This unit comes with interchangable gobos. When changing
the gobos please be very careful. Follow the instructions below,
and see the figure pictures on the next page.
Caution!
Never open the unit when in use. Always disconnect
the main power before attempting to change the gobos.
1. To change the gobo, you must remove the top half of the
moving head. The top half of the moving head does not
have the lens attached to it.
2. Unscrew the 4 phillips screws that secure the top half of the
head. Remove the top half of the head.
3. When you remove the shell you will be able to access the
gobo wheel (see picture below). Rotate the head so that the
lens is aimed up. Turn the gobo wheel with your hand until
you find the gobo you would like to change.
4. Using a pair of needle nose pliers, grab the fixture ring that
holds the gobo in place and remove the ring.
5. Once the ring is removed, rotate the head upside down so
that the gobo falls into your hand.
6. Carefully insert your new gobo and insert the fixture ring.
7. Reassemble the unit.