American DJ Inno Scan LED, User Instructions

Page: 7 / 12

American DJ
®
- www.americandj.com - Inno Scan LED Instruction Manual Page 13 American DJ
®
- www.americandj.com - Inno Scan LED Instruction Manual Page 14
1. Press the MENU button until “ TEST ” is displayed, press
ENTER.
2. The fixture will now run a self test. Press MENU to exit.
TEMP
- With this function you can check the temperature
of the fixture.
1. Press the MENU button until “ TEMP ” is displayed, press
ENTER.
2. The temperature of the fixture will now be displayed. Press
MENU to exit.
FHRS
- With this function you can display the running time
of the unit.
1. Press the MENU button until “ FHRS ” is displayed, press
ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
VER
- With this function you can display the software ver-
sion of the unit.
1. Press the MENU button until “ VER ” is displayed, press
ENTER.
2. The software version will now be displayed. Press MENU to
exit
PROD -
Pro defaults.
1. Press the MENU button until “ PROD ” is displayed, press
ENTER.
2. The display will show either “
YES” or “NO ”. Press the UP or
Inno Scan LED System Menu
DOWN buttons to select “ YES ” to reset back to PRO default
settings, or “ NO ” to not reset to PRO defaults.
3. Press ENTER to confirm.
RSET
- Use this function to reset the unit.
1. Press the MENU button until “ RSET ” is displayed, press
ENTER.
2. The fixture will now reset.
Inno Scan LED System Menu
Inno Scan LED Color & Gobo Adjustment
To enter the Color/Gobo wheel adjustment submenu, press the
ENTER button for at least 5 seconds. In this submenu you are able to
adjust the original position of the gobo wheel and color wheel.
COLO
- Adjustment of the color wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “ COLO ” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
GOBO
- Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “ GOBO ” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.