ADJ Products, LLC - www.adj.com - Inno Pocket Spot Instruction Manual Page 16
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Instruction Manual Page 17
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The Inno Pocket Spot has 2 DMX channel modes; 9 channel
mode or 11 channel mode. See pages 20-23 for detailed descrip-
tion of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 5-7 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 9 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Sound Active Mode:
This mode allows either single unit or several
units linked together, to run to the beat of the music.
1. Press the MENU button until “
SOUN
” is displayed, and press
ENTER. Press the UP or DOWN buttons so that “
ON
” is dis-
played and press ENTER.
2. Press the MENU button until “
SENS
” is displayed, and press
ENTER. Use the UP and DOWN buttons to adjust the sound
sensitivity. Press ENTER when you have found your desired sensi-
tivity level.
Show Mode:
This mode allows either a single unit or several units
linked together, to run one of four shows that you choose.
1. Press the MENU button until “
SHND
” is displayed, and press
ENTER.
2. Press the UP or DOWN buttons until you find your desired show,
and press ENTER.
Inno Pocket Spot
Operation
Inno Pocket Spot
Home Adjustment Menu
OTIL
- Adjustment of the tilt position.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “
OTIL
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
OGOB
- Adjustment of the gobo wheel.
1. Press the ENTER button for at least 5 seconds, then press the UP
or DOWN buttons so that “
OGOB
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
OCOL
- Adjustment for the color wheel.
1. Press the ENTER button for at least 3 seconds, then press the UP
or DOWN buttons so that “
OCOL
” is displayed, press ENTER.
2. Use the UP and DOWN buttons to make your adjustments, and
then press ENTER to confirm. Press the MENU button for one second
to exit.
