![background image](http://html1.mh-extra.com/html/american-dj/inno-pocket-spot-pearl/inno-pocket-spot-pearl_user-instructions_2923111007.webp)
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Pearl Instruction Manual Page 12
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Pearl Instruction Manual Page 13
will automatically go into show mode.
• BLAC (Blackout) - If the DMX signal is lost or interrupted, the unit will
automatically go into stand by mode.
3. Press ENTER to confirm your desired set up.
SOUN -
Sound Active mode.
1. Press the MENU button until “
SOUN
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
SENS -
In this mode you can adjust the sound sensitiv-
ity.
1. Press the MENU button until “
SENS
” is displayed, press ENTER.
2. A number between 0-100 will be displayed. Press the UP or DOWN
buttons to adjust the sound sensitivity. 0 being the least sensitive,
and 100 being the most sensitive.
3. When you have found your desired setting press ENTER to confirm.
PINT
- Pan Inversion
1. Press the MENU button until “
PINT
” is displayed, press ENTER.
Either “
Yes
” or “
No
” will be displayed.
2. To activate the Pan inversion press the UP or DOWN buttons until
“
Yes
” is displayed, press ENTER to confim. To deactivate Pan inver-
sion, select “
No
” and press Enter.
TINT
- Tilt Inversion
1. Press the MENU button until “
TINT
” is displayed, press ENTER.
Either “
Yes
” or “
No
” will be displayed.
Inno Pocket Spot Pearl
System Menu
1. Press the either the MENU button until “
DIND
” is displayed, press
ENTER. 1 of 5 dimmer curves will be displayed. “STDA” (standard),
“STGE” (stage), “TV” (TV), “ARAL” (theatrical), or “THAL” (Architec-
tural).
2. Press the UP or DOWN buttons to find your desired dimmer curve
and press ENTER to confim and exit.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Press the MENU button until “
SLND
” is displayed, press ENTER.
Either “
MAST
”, “
SL 1
”, or “
SL 2
” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to confim.
NOTE: In a Master/Slave configuration you can set one fixture to
Master and then set the next fixture to “
SL 2
”, the fixtures will now
have contrast movement to each other.
LOST
- This mode can be used as a precaution mode, that
in case the DMX signal is lost, interrupted, or power is lost,
the operating mode chosen in the setup is the running mode
the fixture will go into when the DMX signal is lost. You can
also set this as the operating mode you would like the unit to
return to when power is applied.
1. Press the MENU button until “
LOST
” is displayed, and either
“
HOLD
”, “
SHND
”, or “
BLAC
” will be displayed beneath.
2. Press ENTER and the bottom choice will begin to flash. Use the UP
or DOWN buttons to choose an operating mode you would like the unit
to start up in when power is applied or the DMX signal is lost.
• Hold - If the DMX signal is lost the fixture will stay in the last DMX set-
ting. If power is applied and this mode is set, the unit will automatically
go into the last DMX set up.
• SHND (Show Mode) - If the DMX signal is lost, interrupted, the unit
Inno Pocket Spot Pearl
System Menu