ADJ Products, LLC - www.adj.com - Inno Pocket Spot Pearl Instruction Manual Page 10
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Pearl Instruction Manual Page 11
Inno Pocket Spot Pearl
System Menu
System Menu: When making adjustments press ENTER to
confirm your setup then press and hold the MENU button
for at least 3 seconds. To exit without making any adjust-
ments press the MENU button. The display will lock after 30
seconds, press the MENU button for 3 seconds to unlock.
ADDR -
DMX Address Setting
.
1. Press the either the MENU, UP, or DOWN buttons until “
ADDR
” is
displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the
UP or DOWN buttons to find your desired address. Press ENTER to
set your desired DMX address.
CHND -
This will let select your desired DMX channel
mode.
1. Press the either the MENU button until “
CHND
” is displayed, press
ENTER. Either “
9CH
” or “
11CH
” will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel
mode and press ENTER to confim and exit.
SHND -
Show modes 0-4 (Factory programs). Show
mode can run with or without sound active mode active.
1. Press the MENU button until “
SHND
” is displayed, press ENTER.
2. “
Sh X
” will now be displayed, “
X
” representing a number between
0-4. Shows 1-4 are factory programs, while show “0” is random mode.
Use the UP or DOWN buttons to find your desired show.
3. When you have found your desired show press ENTER, then press
and hold the MENU button for at least 3 seconds to activate. After
you have set your desired show, it can be changed at any time using
the UP or DOWN buttons.
DIND -
This will let select your desired dimmer curve.
Inno Pocket Spot Pearl
System Menu
DMX 512 Address Setting
Channel Mode
Show Mode
Slave Mode
Lost DMX Signal
Dimmer Mode
Sound Mode
Sound Sense
Pan Inverse
Tilt Inverse
LED Display
Display Normal
Display Inversion
Auto Test
Fixture Use Time
Reset
Firmware Version
