American DJ Inno Color Beam Z7, User Instructions, Page: 8 / 14

ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 14
ADJ Products, LLC - www.adj.com - Inno Color Beam Z7 User Manual Page 15
Once you have finished testing press the ENTER button.
4. To exit the manual test mode, press the MENU button.
Auto Test
- This function will run a self test program.
1. Press the MENU button until “Auto Test” is displayed, press
ENTER.
2. The fixture will now run a self test. Press the MENU button to
exit.
Temp.
- With this function you can display the running
temperature of the unit.
1. Press the MENU button until “Temp.” is displayed, press
ENTER.
2. The current running temperature of the fixture will now be dis-
played. Press MENU to exit.
Fixture Time
- With this function you can display the
running time of the unit.
1. Press the MENU button until “Fixture Time” is displayed,
press ENTER.
2. The running time of the fixture will now be displayed. Press
MENU to exit.
Firmware Version
- This will display the software ver-
sion
1. Press the MENU button until “Firmware Version” is displayed.
Press the ENTER button and the software vesion will be dis-
played.
2. Press the MENU button to leave this function.
Inno Color Beam Z7 System Menu
PRO Default
- This function will restore the factory set-
tings.
1. Press the MENU button until “PRO Default” is displayed,
press ENTER.
2. Either “YES” or “NO” will now be displayed. Press the UP or
DOWN buttons to select “YES” to switch back to defualt set-
tings, and press ENTER.
Reset
- Use this function to reset the motors.
1. Tap the MENU button until “Reset” is displayed, press
ENTER.
2. The fixture will now reset the motors.
Inno Color Beam Z7 System Menu
Inno Color Beam Z7 UC3 Control
Stand by The unit blackout
Function
1. Sync. Strobe
2. 2 light strobe
3. sound strobe
Select
Show
1-4
1. Hold to change Master Pan position
2. Hold to change Master Tilt position
3. Hold to change Master Dimmer
4. Hold to change Slave Pan position
5. Hold to change Slave Tilt position
6. Hold to change Slave Dimmer
Mode Sound (LED off) LED on LED fast blinking