![background image](http://html1.mh-extra.com/html/american-dj/inno-color-beam-z19/inno-color-beam-z19_user-instruction_2923109009.webp)
ADJ Products, LLC - www.adj.com - Inno Color Beam Z19 User Manual Page 17
ADJ Products, LLC - www.adj.com - Inno Color Beam Z19 User Manual Page 16
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the chases and patterns,
dimmer and strobe. A DMX controller allows you to create unique
programs tailored to your individual needs. The Inno Color Beam Z19
has 14 DMX Channels.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller. See pages 17-20 for
the DMX traits.
2. To run your fixture in DMX mode, set your desired DMX address
following the directions on page 10, and the set-up specifications
that come with your DMX controller.
3. Plug in the fixture via the XLR connections to any standard DMX
controller.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
Inno Color Beam Z19 Universal DMX Control
Master-Slave Configuration:
This function will allow you to link up
to 16 units together and operate without a controller. The units will be
sound activated. In Master-Slave operation one unit will act as the con-
trolling unit and the others will react to the controlling units programs.
Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set the Master unit to your desired operating mode.
3. On the slave units press the MENU button until “Slave Mode” is
displayed, and Press ENTER. Choose either “Slave 1” or “Slave 2”
and press ENTER. See page 11 for more info.
4. The slave units will now follow the Master unit.
Inno Color Beam Z19 Master-Slave Configuration
Channel Value
Function
1 PAN
0 - 255 0° - 540°
2 0 - 255 PAN FINE
3 TILT
0 - 255 0° - 220°
4 0 - 255 TILT FINE
5 RED
0 - 255 0% - 100%
6 GREEN
0 - 255 0% - 100%
7 BLUE
0 - 255 0% - 100%
8 WHITE
0 - 255 0% - 100%
9 COLOR MACROS
0 OFF
1 - 4 MACRO 1
5 - 8 MACRO 2
9 - 12 MACRO 3
13 - 16 MACRO 4
17 - 20 MACRO 5
21 - 24 MACRO 6
25 - 28 MACRO 7
29 - 32 MACRO 8
33 - 36 MACRO 9
37 - 40 MACRO 10
41 - 44 MACRO 11
45 - 48 MACRO 12
49 - 52 MACRO 13
53 - 56 MACRO 14
57 - 60 MACRO 15
61 - 64 MACRO 16
65 - 68 MACRO 17
69 - 72 MACRO 18
Inno Color Beam Z19 14 Channel Mode