American DJ
®
LOS ANGELES, CA. 90058
Caution!
No user serviceable parts inside do not attempt repairs. In the event your timer
remote should fail, contact
AmericanDJ
®
.
Customer Support:
American DJ
®
provides a toll free customer support line, to provide set up help and to
answer any question should you encounter problems during your set up or initial operation. You may also visit
us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through
Friday 9:00 a.m. to 5:00 p.m. Pacific Standard Time.
Voice: (800) 322-6337 Fax: (323) 582-2610 E-mail: [email protected]
The FS-DMXT™ carries a 1 year (365 days) limited warranty. Please fill out the enclosed warranty card
to validate your purchase. All returned service items whether under warranty or not, must be freight
pre-paid and accompany a return authorization (R.A.) number. If the remote is under warranty you
must provide a copy of your proof of purchase invoice. Please contact American DJ® customer sup-
port for a R.A. number.
American DJ
®
Thank you for purchasing this American DJ® product. Please read the manual before using your new
FS-DMXT control.
FS-DMXT™ DMX TIMER REMOTE
DMX Timer Remote:
With the DMX Timer Remote you can operate the fog output automatically and
turn either the Fog Storm 1200HD™ or 1700HD™ into a two channel DMX intellingent unit. The DMX Timer
Remote must be connected to both the fog machine and a universal DMX-512 controller such as the Elation
®
DMX Operator™ or Show Designer.™
WHEN DMX MODE IS ACTIVE THE TIMER FUNCTION WILL NOT WORK.
1. Assign a DMX address to the Fog Storm 1200HD™ or 1700HD™ using the dipswitches on the side of the
DMX Timer Remote.
NOTE: The dipswitches on the side of the DMX Timer Remote are for addressing the fog machine
only.
2. Connect the male XLR cable of the DMX Timer Remote to the female input connection of the universal
DMX-512 controller. Channel 1 controls fog duration and Channel 2 controls the interval time.
3. You can now daisy chain other DMX intelligent lights. Start with the female input connector on the front of
the DMX Timer Remote.
NOTE: The DMX Timer Remote must be the first unit connected to the universal DMX-512 controller.
Timer Function:
The timer function allows haze to be emitted at designated intervals. The remote has three
(3) L.E.D.s that indicate different functions.
WHEN DMX MODE IS ACTIVE THE TIMER FUNCTION WILL NOT WORK.
- The RED L.E.D. located to the left will indicate the timer and controller is turned on and is activated.
- The GREEN L.E.D. will indicate fog output is available and ready.
- The RED L.E.D. located to the right is for manual fogging, wait for the GREEN L.E.D. to light up, then press
the button.
The remote also contains two rotary knobs.
- The Duration knob serves two functions 1) Turns the timer on and off. 2) Sets the timers duration (Length
of fog output).
- The interval knob sets the amount of time in between fog output from 30 seconds to 10 minutes. Turning
these knobs in a clockwise direction will increase there values, turning them in a counter-clockwise direc-
tion will decrease their values.
Caution:
Before removing or replacing the remote control unit disconnect the power supply.
