background image

User Instructions

  FREQ Matrix Quad  

                                  Introduction

ADJ Products, LLC  -  www.adj.com  - FREQ Matrix Quad Instruction Manual Page 2

  3/13

Unpacking: 

Thank you for purchasing the FREQ Matrix Quad by ADJ 

Products, LLC. Every FREQ Matrix Quad has been thoroughly tested 

and has been shipped in perfect operating condition. Carefully check 

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your fix-

ture for any damage and be sure all accessories necessary to operate 

the unit has arrived intact. In the case damage has been found or parts 

are missing, please contact our toll free customer support number for 

further instructions. Do not return this unit to your dealer without first 

contacting customer support. 

Introduction: 

The FREQ Matrix Quad is part of ADJ’s continuing pur-

suit for creating high quality affordable intelligent fixtures. The FREQ 

Matrix Quad is a revolutionary 16-zone LED strobe. The unit has 3 

operating modes; Sound Active, Show Mode, or DMX Control. This 

unit can be used as a stand alone fixture, or in a Master/Slave configu-

ration. This fixture is suitable for theaters, studios, retail stores, and 

other similar locations.  

 

Customer Support:

 ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question 

should you encounter problems during your set up or initial operation. 

You may also visit us on the web at www.adj.com for any comments 

or suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

ADJ Products, LLC.
PLEASE recycle the shipping carton when ever possible.

Summary of Contents for FREQ Matrix Quad











Reviews: