©
American DJ
®
- www.americandj.com - Emerald/Ruby Sync™ Instruction Manual Page 4
©
American DJ
®
- www.americandj.com - Emerald/Ruby Sync™ Instruction Manual Page 3
Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte-
nance of this unit. Please keep this manual with the unit, for future
reference.
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Emerald/Ruby Sync™ General Instructions
Emerald/Ruby Sync™ Safety Precautions
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Safety Issues:
This unit may blow a fuse if the maximum allotted
load of 2 amps is reached.
• To reduce the risk of electrical shock or fire, do not expose this
unit rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Do not attempt to remove or break off the ground prong from
the electrical cord. This prong is used to reduce the risk of electrical
shock and fire in case of an internal short. Do not attempt to operate
this unit if the power cord has been frayed or broken.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user
• 4.9mW Green Laser Diode (Emerald Sync)/ or
4.9mW Red Laser Diode (Ruby Sync)
• Built-In Hanging Yoke
• Sound Active with Internal Microphone
• Master/Slave Operation
• Fan Cooled
• 16 Patterns
•
Blackout Controller (Not Included)
Emerald/Ruby Sync™ Features
Emerald/Ruby Sync™ Warranty Registration
The Emerald Sync/Ruby Sync™ carries a 90 day limited warranty.
Please fill out the enclosed warranty card to validate your purchase.
All returned service items whether under warranty or not, must be
freight pre-paid and accompany a return authorization (R.A.) number.
If the unit is under warranty you must provide a copy of your proof of
purchase invoice. Please contact American DJ
®
customer support for
a R.A. number.
Emerald/Ruby Sync™ Fuse Replacement
Caution:
Always replace with the exact same type fuse, unless
otherwise specified by an authorized American DJ
®
technician.
Replacement with anything other than the specified fuse can cause
fire or electric shock and damage your unit, and will void your manu-
factures warranty.
Warning:
If you continue to blow fuses, STOP using the unit. Contact
DANGER
VISIBLE LASER RADIATION
-AVOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 532 nm
Max Output : <4.9mW
Class IIIa Laser Product
!
!
Emerald/Ruby Sync™ Fuse Replacement cont.
customer support for further instructions, you may have to return the
unit for servicing. Continuing to use the unit may cause serious dam-
age.
Fuse Replacement:
Disconnect the unit’s main power supply. Use
a flat head screw drive to unscrew the fuse holder. When the fuse
holder is exposed remove the old fuse and replace it with the same
type of fuse. When replacing and checking the fuse, be sure to check
that the fuse has the metal ends completely exposed.
