background image

  User Instructions

©

American DJ

®

 - www.americandj.com - Emerald/Ruby Sync™ Instruction Manual Page 2

Unpacking:

  Thank  you  for  purchasing  the  Emerald  Sync/Ruby 

Sync™ by American DJ

®

. Every Emerald Sync/Ruby Sync™ has been 

thoroughly tested and has been shipped in perfect operating condition. 

Carefully check the shipping carton for damage that may have occurred 

during shipping. If the carton appears to be damaged, carefully inspect 

your unit for any damage and be sure all equipment necessary to oper-

ate the system has arrived intact. In the event that damage has been 

found or parts are missing, please contact our toll free customer sup-

port number for further instructions. Please do not return the unit to 

your dealer without first contacting customer support. 

Introduction:

 

Thank you for purchasing the American DJ

®

 Emerald 

Sync/Ruby Sync.

 The Emerald Sync/Ruby Sync™ is a unique laser 

effect that projects 16 different patterns. It is a sound sensitive unit that 

can operate as a stand-alone unit or in a Master/Slave configuration.  

Customer Support:

 

American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any questions should 

you encounter problems during your set up or initial operation. You may 

also visit us on the web at www.americandj.com for any comments or 

suggestions. For service related issue please contact American DJ

®

Service  Hours  are  Monday  through  Friday  9:00  a.m.  to  5:00  p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact  

American DJ

®

 Customer Support.

PLEASE do not discard the shipping carton in the trash. Please 
recycle when ever possible.

Emerald/Ruby Sync™       General Introduction

 Revised 10/09

 American DJ

®

Summary of Contents for Emerald Sync









Reviews: