background image

User Instructions

©

American DJ

®

 - www.americandj.com - Emerald Sky™ Instruction Manual Page 2

Unpacking:

 Thank you for purchasing the Emerald Sky™ by Ameri-

can  DJ

®

.  Every  Emerald  Sky™  has  been  thoroughly  tested  and  has 

been shipped in perfect operating condition. Carefully check the ship-
ping  carton  for  damage  that  may  have  occurred  during  shipping.  If 
the carton appears to be damaged, carefully inspect your unit for any 
damage and be sure all equipment necessary to operate the unit has 
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 

instructions. Please do not return the unit to your dealer without first 

contacting customer support. 

Introduction:

  The  Emerald  Sky™  is  a  unique  two  channel,  DMX 

intellingent dual  green  laser  effect that  creates  several  different  pat-
terns. The unit uses two lasers to project several patterns over a wide 
area. This unit can be used as a stand alone, sound-active unit or in a 

Master/Slave configuration. The unit can also be controlled via DMX 

controller.  The unit’s sound sensitivity may be adjusted by a sensitivity 
knob on the rear of the unit. 

For best results use fog or special effects 

smoke to enhance the beams projections.

Customer  Support:

  American  DJ

®

  provides  a  toll  free  customer 

support line, to provide set up help and to answer any question should 
you  encounter  problems  during  your  set  up  or  initial  operation.  You 
may  also  visit  us  on  the  web  at  www.americandj.com  for  any  com-
ments or suggestions. For service related issue please contact Ameri-
can DJ

®

. Service Hours are Monday through Friday 9:00 a.m. to 5:00 

p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected] 

To purchase parts online visit http://parts.americandj.com
Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ customer support.

Please recycle the shipping carton when ever possible.

Rev. 10/09

 Emerald Sky™    

 

 

General Introduction

Summary of Contents for Emerald Sky











Reviews: