©
American DJ
®
- www.americandj.com - Emerald Sky™ Instruction Manual Page 7
©
American DJ
®
- www.americandj.com - Emerald Sky™ Instruction Manual Page 8
Emerald Sky™
Warning Labels
Emerald Sky™
Control & Functions
1. Audio Sensitivity Knob - This adjusts the audio sensitivity of the
internal microphone. Turning the sensitivity knob in the clockwise
direction will increase the sensitivity to sound. Turning the knob in
the counter clockwise direction will decrease the fixture’s sensitivity
to sound. If the knob is turned completely in the counter-clockwise
direction the sound sensitivity function will turn off.
2. Microphone - This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
3. XLR Input Jack - This male input jack is used to accept an incom-
ing DMX signal or Master/Slave signal.
4. XLR Output Jack - This female output jack is used to transmit the
incoming DMX signal to another DMX fixture, or transmit a Master/
Slave signal to the next Emerald Sky™ in the chain. For best results in
DMX or Master/Slave mode terminate this jack if it is the last unit in the
chain. See “Terminator” on page 10.
5. Power Cord -
This cord is used to supply main power to the fixture.
Be sure the main power matches the required power of your fixture.
The rated power requirements are clearly marked on the rear panel of
the unit.
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
1
2
9
8
7
6
5
4
3
10
