©
American DJ
®
- www.americandj.com - DJ Spot 250™ Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - DJ Spot 250™ Instruction Manual Page 13
the slowest and 255 being the fastest.
Note: The fade time should usually be set to a faster speed
then the speed time.
AUDI
- This function is the Sound Active mode.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
Then press the UP button until “
AUDI
” is displayed. Press the
ENTER button.
2. Press the UP button to display “
YES
”. Press ENTER to con-
firm.
3. You can adjust the audio sensitivity of the unit by turning the
audio sensitivity knob clockwise, located in the rear.
Note: When the unit is in Sound Active mode, “test run” will
continuously flash on the LCD screen.
RPAN
-
The movement of the Pan will be reversed.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
Then press the UP button until “
R.PAN
” is displayed.
2. Press the UP button to choose “
ON
” or “
OFF
”, then press
ENTER to confirm.
3. Press ESC to return to the main menu..
R.TILT
-
The movement of the Tilt will be reversed.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
Then press the UP button until “
R.TILT
” is displayed.
2. Press the UP button to choose “
ON
” or “
OFF
”, then press
ENTER to confirm.
3. Press ESC to return to the main menu.
DISP
-
This function will reverse the display 180º.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
DJ Spot 250™
System Menu
DJ Spot 250™
System Menu
Then press the UP button until “
DISP
” is displayed. Press the
ENTER button. “
TURN
” will now be displayed.
2. Tap the UP button to change the display and press ENTER to
confirm the new display.
3. Press ESC to return to the main menu.
VERS
- Use this function to display the Software version of
the unit.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
Then press the UP button until “
VERS
” is displayed. Press the
ENTER button.
2. Tap the UP button until “
SET
” is displayed, press ENTER.
3. Tap the UP button until “
VER
” is displayed, press ENTER.
4. The display will show “
V-X.X
”, “X.X” stands for the version
number, such as the display may show “
V-1.0
”, “
V-2.6
” etc.
5. Press ENTER or EXIT/DN to exit.
DEFA
- With this function you can restore the factory set-
tings of the device.
1. Press the ESCAPE (ESC) button until “
A.001
” is displayed.
Then press the UP button until “
DEFA
” is displayed. Press the
ENTER button.
2. The display will show “
YES
”.
3. Press ENTER to confirm.
7. Press EXIT/DN to return to the main menu.
When you exit this function, the unit will begin to reload
data.
R.S.E.T.
- When you activate the reset function, the fixture
will begin the reset motion.