©
American DJ Supply
®
- www.americandj.com - Concept Color™ Instruction Manual Page 12
©
American DJ Supply
®
- www.americandj.com - Concept Color™ Instruction Manual Page 11
Concept Color™ Cleaning
Due to fog residue, smoke, and dust cleaning the internal and
external optical lenses must be carried out periodically to opti-
mize light output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the
fixture operates (i.e. smoke, fog residue, dust, dew).
Concept Color™ Trouble Shooting
Listed below are a few common problems the user may encounter,
with solutions.
No light from the unit:
1. Check if the (red) LED (on the bottom) is lit and the fan is
running.
2. Check the fuse in the back panel.
3. Check if lamp is lit. If power is present but the
lamp is not lit, the lamp may need to be replaced.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
Concept Color™
Halogen Lamp Warning
This fixture is fitted with halogen lamps which
are highly susceptible to damage if improperly
handled. Never touch the lamps with your bare
fingers as the oil from your hands will shorten
lamp life. Also, never move the fixture until the
lamps have had ample time to cool. Remember,
lamps are not covered under warranty condi-
tions.
Concept Color™ Lamp Replacement
Lamp Replacement: Caution!
Never open the unit when in use.
Always disconnect the main power before attempting to replace
the lamp.
Remember always replace with the same type lamp
and fuse.
1. Be sure to follow the proper procedures when handling
halogen bulbs.
2. Unscrew the four thumb screws on the bottom of the unit.
3. Slide the lamp compartment out of the unit.
4. Remove and replace the bulb.
5. Reassemble.
Fuse Replacement:
Caution!
Always disconnect the main
power before attempting to replace the fuse.
Remember always
replace with the same type lamp and fuse.
1. With a flat screwdriver wedge the fuse holder out of the its
housing
2. Remove the old fuse from the holder and replace with the
exact same type fuse.
3. Replace the fuse holder in to the fuse holder housing.
4. Reconnect main power.
Concept Color™ Fuse Replacement
