background image

User Instructions

American DJ

® 

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

  Concept 2™  

 

 

 

 

 Introduction

©

American DJ Supply

®

  -  www.americandj.com  - Concept 2™ Instruction Manual Page 2

American DJ

®

 

Revised 

10/03

General instructions: 

To optimize the performance of this product, 

please read these operating instructions carefully to familiarize yourself 
with the basic operations of this unit. These instructions contain impor-
tant safety information regarding the use and maintenance of this unit. 
Please keep this manual with the unit, for future reference.

Unpacking: 

Thank you for purchasing the Concept 2™ by American 

DJ

®

.  Every  Concept  2™  has  been  thoroughly  tested  and  has  been 

shipped  in  perfect  operating  condition.  Carefully  check  the  shipping 

carton for damage that may have occurred during shipping. If the carton 

appears to be damaged, carefully inspect your fixture for any damage 

and be sure all accessories necessary to operate the unit has arrived 

intact. In the case damage has been found or parts are missing, please 

contact our toll free customer support number for further instructions. 

Do not return this unit to your dealer without first contacting customer 

support. 

Introduction: 

The Concept 2

TM

 is part of American DJʼs continuing 

pursuit for creating high quality affordable intelligent fixtures. The Con-

cept 2™ is a DMX scanner with a built-in 4.9mW diode laser. Both the 

laser and the lamp can be operated at the same time for truly amazing 

effects. This unit is light weight and compact which makes it a great 

piece for mobile DJʼs and clubs. For best results use this unit with a fog 

machine to enhance the output of the beams and laser.

 

Customer Support:

 

American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 

encounter  problems  during  your  set  up  or  initial  operation.  You  may 

also visit us on the web at www.americandj.com for any comments or 

suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:

00 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2610

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ

®

.

Summary of Contents for Concept 2












Reviews: