4. Menu Button - This button is used to select the different
menu options.
5. Edit Button - This button is used to increase the current dis
play value in by a factor of one. Each tap will change the
value once. Holding down the Edit Button will increase the
value rapidly.
6. Store Button - This button will serve two functions. When
used with the Edit Button (5), this button can be used to de-
crease the current display value by a factor on one. This
button is also used to lock your desired settings in to the
unit’s memory.
7. DMX XLR Output Jacks - This jack is used to send the DMX
input signal through to the next DMX device.
8. DMX XLR Input Jack - This jack is used to receive the in-
coming DMX signal.
9. Power Switch - This switch controls the unit’s main power.
10. Power Cords - These cords are used to supply your unit’s
main power. Plug these cords in to a standard 110V Edison
wall socket.
Both cords must be plugged in for proper operation.
11.Channel Fuses - Each channel has its’ own protective fuse.
Only replace with the exact same type fuse, 6A GMA.
Rear Panel:
Front Panel:
AVIATOR SP-8™ Functions and Controls
AVIATOR SP-8™ Operation
American DJ
®
OUTPUT: 5A/CH, TOTAL 15A Max.
OPERATION
DISPLAY ITEMS
DMX
EDIT STORE
MENU
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
A
viator-SP8
POWER INPUT
POWER
FUSES: F10A 250V 5x20 mm
2
3
4
1
6
7
8
5
DMX IN
DMX OUT
3 2
1
1=Ground
2=Data-
3=Data+
3 21
AC 120V ~ 50-60Hz
N’OUVREZ PAS..RISQUE DE CHOCELCTRIQUE
WARNING: THIS APPARATUS MUST BE EARTHED
MAIN CONTROL
1-4 CH
5-8 CH
15A MAX
15A MAX
CAUTION
RISK OF ELECTRICAL SHOCK
DISCONNECT INPUT POWER
BEFORE OPENING
7
9
8
11
10
General Instructions:
The Aviator-SP8 is a 8 channel DMX switch pack, consisting of
a Segment Display and several push buttons that can be used
easily. The Aviator-SP8 is controlled via a standard DMX con-
troller, which allows you to control special affect lighting.
The Aviator-SP8 has two different operating modes: Self Test
mode and DMX mode. Please follow the instructions below to
operate the unit in your desired mode.
Self Test Mode:
This function serves two functions. This function can be used
to run the Aviator SP-8™ as a simple 8 channel chaser. You can
also use this mode to perform a unit self test. This function will
run through a simple progressive eight channel chase. You may
only control the speed of the chase, there no built-in patterns.
2. Use the Edit button to increase the speed.
Each tap will change the speed by a value
of one. Pressing and holding down the Edit
button will increase the speed value rapidly.
1. Turn the unit’s main power on , the LCD will
detail the last adjusted speed setting. Speed
is indicated by “SP” followed by a number
value of 1-9. A value of 1 will give the slow-
est speed (a chase interval of 10 minutes),
and the value of 9 will give the fastest speed
(a chase interval of 1/10th of a second).
©
American DJ Supply
®
www.americandj.com AVIATOR SP-8™ Instruction Manual Page 8
©
American DJ Supply
®
www.americandj.com AVIATOR SP-8™ Instruction Manual Page 7