background image

DMX Channel Mode:

This function allows you to use the Aviator SP-8 as a 1, 2, 4, or 8 

channel dimmer/switcher pack. 
When “CH-1” is selected, all 8 channel are controlled by one 

DMX channel.
When “CH-2” is selected,  CH. 1-4, and CH. 5-8  are each 

controlled by one DMX channel. Total of two DMX channels to 

operate the pack.
When “CH-4” is selected, every two channel( CH. 1-2, CH. 3-4, 

CH. 5-6 and CH.7-8) will be controlled by one DMX channel. 

Total of 4 DMX channels.
When “CH-8” is selected, each channel will be controlled by 

one DMX channel. Total of 8 DMX channels

  AVIATOR SP-8™                                                  Operation 

1. To change the operating channel 

mode,  press the Menu button to access 

the channel selector function. 
Channel mode is signified by “ CH-” fol-

lowed by either 1, 2, 4, or 8.

  AVIATOR SP-8™                                                  Operation

2. Use the Edit button to increase the 

DMX channel value. Each tap will change 

the DMX channel value by a factor of 

one. Pressing and holding down the Edit 

button will increase the DMX channel 

value rapidly.

3. To decrease the DMX channel value, 

use the Edit and Store button in conjunc-

tion with each other. While pressing and 

holding down the Edit button, tap the 

Store button to decrease the DMX chan-

nel value. Each tap of the Store button 

will decrease the DMX address by a 

factor of one. Holding down the Store 

button will decrease the DMX channel 

value rapidly.

4. Once you have completed your adjust-

ments, tap the Store button. The LCD will 

display “Stor” for approximately 2 sec-

onds. This will store your DMX channel 

value in to the unit’s built-in memory.

Channel Override Function:

This function allows you to manually override a channels function 

regardless of the operating mode. With this function you can set 

a channel to remain “on” or remain “off” during any function. 

1. To access this function use the menu 

button to access the units menu. The 

override function will be indicated by a  

“L” in the first character in the LCD.

©

American DJ Supply

® 

  www.americandj.com   AVIATOR SP-8™ Instruction Manual Page 12

©

American DJ Supply

® 

  www.americandj.com   AVIATOR SP-8™ Instruction Manual Page 11

Summary of Contents for AVIATOR-SP8









Reviews: