American DJ
®
- www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 16
American DJ
®
- www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 15
Accu Spot 250 II™
System Menu
ADDRESS MENU -
A001 - A511
- This is where you set the DMX address of the unit.
TEST MENU -
T-01 - T-XX
- Tests the functions of each channel. There are
eight channels, but only channels 1,2,3,4, and 6 can be tested.
PLAY MENU -
RUN
- Runs the unit as a “master” in a Master/Slave configura
-
tion or as a Stand Alone unit. The unit will run a internal pro-
gram.
AUDI
(Audio) - Runs the unit as a “master” in a Master/Slave
configuration or as a Stand Alone unit in sound active mode.
AUTO
- This is a precaution mode in case the DMX signal is lost.
There are four settings to choose from:
• “Off” - This is the default setting, which in case the signal is
lost the fixture will “hold” at the last setting.
• “Run” - The fixture will go into Auto mode and run a pre-pro
-
grammed show.
• “Audi” - The fixture will go into Sound Active mode.
AUDI MENU -
ALON
(Alone) - Unit runs in stand alone mode, no master/slave.
MAST
(Master) - Designates that unit to be master in master/
slave mode.
LAMP MENU -
ON/OFF
- Manually switches the lamp “On” or “Off”.
RESE (RESET) MENU -
ALL
- Resets all motors.
SCAN
- Resets the pan/tilt motors.
COLR
(Color) - Resets the color wheel motor.
GOBO
- Resets the gobo wheel motor.
SHTR
(Shutter) - Resets the shutter and dimmer motors.
TIME MENU -
LIFE
- Displays the total fixture running time.
LAMP
- Displays the lamp running time.
CLMP
- Clears the lamp running time.
RPAN MENU -
ON/OFF
- Reverses the pan.
RTLT MENU -
ON/OFF
- Reverses the tilt.
MIC MENU -
M-01-M-70
- With this function you can make the internal mic
more or less sensitive to sound.
DISPLAY MENU -
VALU
(DMX-512 Value) - Display the DMX-512 value of each
channel.
D ON
- Turns digital display off after 2 minutes.
FLIP
- “Flips” the digital display 180º.
SPEC MENU -
LAAU
- On/Off Automatically switches on lamp when power is
applied.
RDMX
- On/Off With this function you are able to change the
DMX address via external controller. See pages 26-27
.
MODE
- 8Ch/9Ch With this function you can switch between 8
channels and 9 channels. See pages 40-42 for the 8 Channel
mode DMX traits, and 43-45 for 9 Channel mode DMX traits.
Accu Spot 250 II™
System Menu