Accu Spot 250 II™
System Menu
Accu Spot 250 II™
System Menu
American DJ
®
- www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 22
American DJ
®
- www.americandj.com - Accu Spot 250 II™ Instruction Manual Page 21
SCAN
With this function you can reset the pan/tilt motors.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SCAN
” is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
COLR
With this function you can reset the color wheel
motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
COLR
” is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
GOBO
With this function you can reset the gobo wheel
motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
GOBO
” is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
SHTR
With this function you can reset the shutter motor.
1. Access the main menu.
2. Tap the UP button until “
RESE
” is displayed, press ENTER.
3. Tap the UP button until “
SHTR
” is displayed, press ENTER.
4. Press ENTER to reset.
5. Press MODE/ESC to return to the main menu.
TINE
MAIN MENU -
LIFE
- With this function you can display the running time
of the unit.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LIFE
” is displayed, press ENTER.
4. The display shows the running time of the unit.
5. Press MODE/ESC to return to the main menu.
LAMP
- With this function you can display the running time
of the lamp.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
LAMP
” is displayed, press ENTER.
4. The display shows the running time of the lamp.
5. Press MODE/ESC to return to the main menu.
CLMP
- With this function you can clear the running time of
the lamp. Note Very Important: Please clear the lamp time
every time you replace the lamp.
1. Access the main menu.
2. Tap the UP button until “
TIME
” is displayed, press ENTER.
3. Tap the UP button until “
CLMP
” is displayed.