Accu Fog 1000
System Menu
On-Board System Menu.
The Accu Fog 1000 comes with an easy
to navigate system menu. This next section will detail the functions of
each command in the system menu.
enter Button -
To access the main menu locate the ENTER button
on
the side of the unit. Press this button to activate the system menu. Tap
the UP button until you reach function you wish to change. When you
reach the function you wish to change tap the ENTER button
.
When
a function is selected the menu will begin to flash, use the
UP button
to change the function. Once your changes are made tap the ENTER
button
again to lock the change in the system, if the ENTER button
is
not selected within eight seconds the system will automatically return
to menu section. To exit without making any changes tap the
MODE/
ESC button.
American DJ
®
- www.americandj.com - Accu Fog 1000 Instruction Manual Page 14
American DJ
®
- www.americandj.com - Accu Fog 1000 Instruction Manual Page 13
ADDR
MAIN MENU -
ADDR
DMX Address Setting
via control board -
1. Access the main menu.
2. Tap the UP button until “
ADDR
” is displayed, press ENTER.
4. Now the display will show “
A001
”. Adjust the DMX address
by pressing the UP or DOWN buttons.
5. Press ENTER to confirm.
6. Press the MODE/ESC button to return to the main menu.
When the display is on
“
A001
”,
you can directly press the UP
or DOWN buttons to change the DMX start address.
TEST
MAIN MENU -
TEST
- this will test the functions of each channel.
1. Access the main menu.
2. Tap the UP button until “
TEST
” is displayed, press ENTER.
3. The display will show “
T-01
”. You can now press the up
button and test the different channels. For example: If you
press the up button until “
T-03
” is displayed, the unit will test
the speed of the pan/tilt movement.
5. Press MODE/ESC to exit.
PLAY
MAIN MENU -
RUN
Run the unit as a “master” in a master/slave configu-
ration, or as a stand alone unit, in auto mode -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
RUN
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
”. Select your preference and press ENTER.
5. Press MODE/ESC to return to the main menu.
AUDI
Run the unit as a “master” in a master/slave config-
uration, or as a stand alone unit, in sound active mode -
1. Access the main menu.
2. Tap the UP button until “
PLAY
” is displayed, press ENTER.
3. Tap the UP button until “
AUDI
” is displayed, press ENTER.
4. Tap the UP or DOWN button to choose between “
MSTR
” or
“
ALON
”. Select your preference and press ENTER.
5. Press MODE/ESC to return to the main menu.
AUTO
Runs the unit in Sound Active mode or a Auto pro-
gram -
1. Access the main menu.
Accu Fog 1000
System Menu
