![American DJ Audio DCD PRO 250 Instruction Manual Download Page 15](http://html1.mh-extra.com/html/american-dj-audio/dcd-pro-250/dcd-pro-250_instruction-manual_2923292015.webp)
15. PITCH BENDING
• This function momentarily increases or decreases the playback speed of a CD respectively when the
+
PITCH BEND
or
- PITCH BEND
button is pressed. The extent to which the speed changes is
proportionate to the amount of time the button is pressed. For example, if the
+ PITCH BEND BUTTON
is held down continuously, the CD’s speed increases and will continue to increase until reaches a
maximum of 16% gain in speed. When you release the
+ PITCH BEND BUTTON
the speed of the CD
will automatically return to it’s previous speed.
• The pitch can be changed from +/- 8%, +/- 12% or +/- 16% range. See changing PITCH PERCENTAGE.
• The jog wheel will temporarily bend the pitch if a track is in play mode. Rotating the wheel clockwise
will speed up your track and rotating the wheel counter-clockwise will slow the track down. The speed
that you rotate the
JOG WHEEL
determines the percentage (%) of the PITCH BEND.
16
.
TRACK
PROGRAM PLAY
• This function allows you to program up to 20 tracks and have them replayed in any order.
• To program a track in to memory:
1) Be sure the drive is in
PAUSE
or
CUE MODE
.
2) Press the
PROG. BUTTON
to activate the units program mode. The program indicator LED above the
PROG BUTTON
will light and the
PROGRAM INDICATOR
in the
LCD DISPLAY
will turn on
indicating that PROGRAM MODE has been activated.
3) Select a Track by using the
FORWARD AND REVERSE TRACK BUTTONS
, and again press
PROG.
BUTTON
this will enter the track into memory.
4) Repeat this up to 19 times (i.e. up to 20 tracks can be programmed). If you keep pressing the
PROG. BUTTON
the
LCD DISPLAY
will indicate which tracks have been programmed.
(4) Press the
PLAY BUTTON
to begin playing programmed tracks.
(5) To cancel the program press and hold down the
PROG. BUTTON
for more than two (2) seconds.
17. Time Display (see figure 14)
• Pressing the
TIME
button repeatedly will change the select time display mode:
A = Elapsed playing time.
B = Remaining time in a selection.
C = Total remaining time of the disc.
BASIC OPERATION (CONT.)
Fig. 14
American DJ
®
AUDIO • DCD-PRO250™ INSTRUCTIONS MANUAL • PAGE 15