13. Editing A Loop:
• Note: You can only edit the ending point of the loop.
• Before you can edit a seamless loop you obviously, must first be in SEAMLESS LOOP mode.
• If a SEAMLESS LOOP has not yet been created, follow instructions above (SEAMLESS LOOP PLAY) to create a
SEAMLESS LOOP. If a SEAMLESS LOOP has already been created, press the
RELOOP BUTTON
to reenter the
SEAMLESS LOOP mode (Fig. 17).
1) Press the
OUT/LOOP BUTTON
to return to normal play from the loops cue point. (Fig. 16). This
disengages the SEAMLESS LOOP mode and allows you to edit the loops ending point.
2) Press
OUT/LOOP BUTTON
again for a new loop ending point (Fig. 16).
3)
FOR A SHORTER LOOP:
Press the
OUT/LOOP BUTTON
at sooner point in the track.
4)
FOR LONGER LOOP:
Press the
OUT/LOOP BUTTON
at later point in the track.
14. Program play
•
Press the PROGRAM button, the player will enter the program mode and the CD will stop rotating.
•
Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The
selected track will be added to the program sequence.
•
Repeat step 2 operation. A maximum of 30 tracks can be programmed at one time.
•
Press the PLAY button to start the program play from the first selection.
•
Press the program button again during program play to stop play.
•
Press and hold the program button more than 2 seconds to cancel the program mode and erase all
the current program contents.
5
REMOTE COTROL UNIT
DISC 1
DISC 2
TIME
TIME
PLAY
PLAY
5
REMOTE COTROL UNIT
DISC 1
DISC 2
TIME
TIME
PLAY
PLAY
American DJ
®
AUDIO • DCD-PRO250™ INSTRUCTION MANUAL • PAGE 14
BASIC OPERATIONS (CONT.)
Fig. 15
Fig. 17
Fig. 16
11. Scanning (fast forward / Fast reverse)
• This function allows a fast search through a disk or track. Turning the
Outer Shuttle wheel in clockwise direction will fast forward your search.
Turning the Outer Shuttle wheel in a counter-clockwise will fast reverse
your search. You can scan in 6 different speeds (3 forward/3 reverse)
depending on the degree you turn the shutter wheel.
12. Seamless Loop Play
• A seamless loop is a sound loop that plays
continuously without
sound interruption.
• You create a seamless loop between any two continuous points in a CD.
(1) Press the
PLAY BUTTON
to start a CD playing.
(2) Press
IN/LOOP BUTTON
. This sets the loops' starting
point. The
IN/LOOP LED
will begin to glow (Fig. 15).
(3) Press
OUT/LOOP BUTTON
to set your desired loop ending point.
The
IN/LOOP
and
OUT/LOOP
LEDs will flash indicating SEAMLESS
LOOP mode has been activated.
• LOOP INDICATOR
(1) The loop indicator will display in the LCD display indication that a
loop is running.
• Exiting A LOOP
(1) To Exit a SEAMLESS LOOP, Press the
OUT/LOOP BUTTON
. The
IN/LOOP
and
OUT/LOOP
LEDs will remain on, but will stop
flashing. Music will resume normal play (Fig. 16)
• REPLAY LOOP
(1) To replay the loop, press the
RELOOP BUTTON
. The
IN/LOOP
and
OUT/LOOP
LEDs will again begin to flash indicating SEAMLESS
LOOP MODE has been activated (Fig. 17).
5
REMOTE COTROL UNIT
DISC 1
DISC 2
TIME
TIME
PLAY
PLAY
