background image

Control Panel

7

When plug in, follow the start music, unit is in standby status. Digital screen will indicate
temperature (Range: 41º-95ºF), if temperature above 95º, screen will show “H”, if below 41º, 
indicate “L”.
ON/OFF  BUTTON: When press this button, model will be in cooling mode (Setting temperature 
75º), high speed fan. Press again, unit will shut off and play shut off music.
MODE BUTTON:  Press this key to choose Cooling, Fan, and Dehumidifying Mode.
FAN BUTTON:

a. Under cooling mode:   HIGH FAN - MIDDLE FAN - LOW FAN
b. Under fan model: same as cooling mode
c. Under dehumidifying mode, fan is working in low speed
d. If switch between cooling and fan, fan speed won’t change.             

TIMER BUTTON:
Press once, TIMER icon 

 ashes, “88” area indicates 24:00; you can set your time with UP and 

DOWN buttons. You can set auto shut off time when the unit is running, you can also set auto 
running time when the unit is off.  When you 

 finishing  the setting, icon will continue 

 ashing until 

the current time is right the setting time. If set again, history record will be cleared.
UP AND DOWN  BUTTONS:
Set temperature and timer. Under cooling , temperature range is 64º~86º, press Up and Down 
buttons together can exchange to:
SLEEPING KEY:  
Under cooling or heating mode, press the key can make unit into sleeping mode, LCD will show 
the Sleeping Icon, press again to cancel Sleeping mode.
SWING BUTTON: 
Press this key to start auto swing function, press again to cancel.
MIGHTINESS KEY: 
Press this key to choose mightiness function: 
You can get cooling effect quickly only under cooling mode.

Timer

 l

a

n

g

i

S

p

U

Receptor

Swing

Display Area

Mode

ff

O

/

n

O

n

w

o

D

Fan Speed

s

s

e

n

it

h

g

i

M

g

n

i

p

e

e

l

S

1

Summary of Contents for ACW613C
















Reviews: