7
7) By pressing both the “
” and “
” button on the front control panel, it will turn
to high or low power.
8) By pressing both the “
” and “
” button on the front control panel,it will turn to
setting temperature or ambient temperature.
9) Portable Heater will turn off by pressing the “ “button on the front control panel.
DO NOT TURN OFF THE MASTER POWER SWITCH ON THE REAR OF THE HEATER
OR UNPLUG THE HEATER UNTIL THE FAN SHUTS DOWN. If the heater is still in the
TIMER function, there will be (5) seconds sound alert to let you know that the timer has
been cancelled. If no actions are taken, the heater will shut off.
10) If the quartz heater gets damaged, the LED will display “
E1
”
11) If the temperature system gets breakdown, the LED will display “
E2
”.With alarm
sound, heater will stop working.
12) If the temperature is more than 98F (37
℃
), the LED will display “
E3
”, with alarm
sound, heater will stop working.
Recommendations for Maximum Performance
1.
Be sure not to place the heater in an area where the air flow or air movement is great.
2.
Direct the outflow towards the center of the room and not against a solid structure,
like a wall for example for larger areas place the heater within a central location.
3.
The Infrared heater is designed for maximum efficiency in the 68 °F to 74°F range.
This is because of the ambient air moving through the heater and out constantly.
4.
It is not recommended to operate heater in areas exposed to non-insulated concrete
or metal walls. Concrete floors should be covered to insulate the heat within the
room.
5.
If the heater filters become dirty or dusty, they must be cleaned for the heater to
operate at it maximum efficient.
Care, Maintenance, and Storage
Before care or maintenance is applied, always unplug the cord from the receptacle. The
cabinet housing can be wiped down with water and a damp cloth or with furniture polish.
The heater has a washable air filter. The filter should be cleaned regularly to provide for
maximum performance. Once the filter is removed, run warm water through and over
the filter to remove dirt and dust. Shake all residue water from the filter and replace it
back in the heater.
(Note: A mild soap can be applied to assist in removing dirt and dust from the filter.)
4
Caractéristiques de l’appareil
No de modèle du radiateur
ACW0039
Dimensions du carton:
15.0po x 16.5 po x 20.9 po
Dimensions du radiateur:
12.5po x 14,2 po x 17.0 po
Poids net:
26.2 lbs
Poids brut:
30.0 lbs
Boîtier:
TUSCAN, EXPRESSO, OAK
Cordon d’alimentation:
8 pi, calibre 14
Alimentation:
120V, 15 A
Thermostat: électronique
analogique
Système de ventilation:
ventilateur tangentiel
Niveau de bruit du ventilateur:
46dB
Mise en marche différée
OUI
PP maillage
+
maillage du
charbon de bois
+ TIO2
OUI
Type de chauffage:
chaleur au quartz à infrarouge
Éléments chauffants:
4 ampoules au quartz à infrarouge, munies d’un
filament en nickel-chrome
Garantie:
garantie limitée d’3 an sur les pièces
Durée de vie nominale des éléments chauffants: 20 000 hres-30000 hres
Déballage du foyer portatif
1.
Vérifiez d’abord l’état du carton. Il pourrait avoir été endommagé pendant le
transport.
2.
Ouvrez le carton et retirez le foyer en le glissant du carton. Vous pouvez renverser le
carton doucement et avec attention pour en faire sortir lentement le foyer.
3.
Retirez tout le matériel d’emballage. Conservez-le ainsi que le carton, afin de vous
en servir pour protéger le foyer pendant la saison où il n’est pas utilisé.
