Metal
Inserts
Metal
Inserts
3/4"Connector Bolts
with Lock Washer
Posts
Posts
E
D
Crib Spring
1 Pc.
FIGURE 4
G
Pivot Arms
4. Attach crib spring G to metal insert with four–3/4" Connector Bolts with lock washers, using
Allen Wrench provided. See Figure 4. There are three metal inserts for height adjustment of crib
spring.
Note: Crib spring should be lowered as child grows to discourage child from trying
to climb out.
3. Attach small end panels A to posts D and E with eight–2¾ " connector bolts with lock wash-
ers. Attach ¾ " connector bolts and Connector caps (hand tighten) in remaining holes as shown
in Figure 3.
Caution: Any mattress used in this crib must be at least
27 1/4 inches by 51 5/8 inches with a thickness not
exceeding 6 inches.
2¾ "
Connector Bolt
Connector
Cap
Small End Panel
2 Pcs.
FIGURE 3
Posts
Posts
E
D
A
¾ " Connector Bolt
add Lock Washer
2¾ "
Connector Bolt
¾ " Connector Bolt
add Lock Washer
Connector
Cap
WARNING
LABEL
Warning label facing out.
Label must be visible at all
times. Do not remove label.
