8. MAIn PoWeR Inlet –
This connector is used to supply main power to the unit via the in-
cluded detachable power cord. The power connection uses an I.E.C. type connector, use
only a power cord that matches this type of connection. be sure to only connect this unit to
a power outlet that matches the printed power label on the unit. Never use a power when the
ground prong has been removed or broken off. The ground prong is used to reduce the risk
of electrical shock in case of an electrical short. This cord is designed to fit in one direction
only. Do not attempt to force a cord if it does not fit, be sure the cord is being inserted prop
-
erly.
9. FUSe HoldeR –
This housing stores the 2 amp GMA protective fuse. Always replace with
the exact same type fuse, unless otherwise instructed, by an authorized American Audio
®
service technician. Replacing with any other type of fuse than that of the recommended fuse
will void your unit warranty.
10. XlR lIne oUtPUt –
Using a XLR cable, use this port to daisy chain from your XSP-8A to
another XSP-8A or other powered speaker.
©
American Audio
®
- www.AmericanAudio.us - XSP-A Series - Instruction Manual Page 8
XSP-A Series
Controls and Features
