MASTER
THROUGH
©
American Audio
®
- www.AmericanAudio.us - XSP-A Series - Instruction Manual Page 6
XSP-A Series
Controls and Features
1. HIgH FReqUenCy tRAnSdUCeR –
This unit is used to reproduce the high frequency
response.
2. WooFeR –
The high-powered woofer is used to reproduce the midrange and low frequen-
cies.
3. RUbbeR Foot –
The speaker includes heavy-duty rubber feet on the bottom of the unit.
These feet are used to secure a speaker to another when stacking. They are also used to
secure the speaker to the ground to prevent it from shifting during heavy bass reproduction.
4. Pole MoUnt SoCket –
This socket is designed to fit a standard speaker pole mount or tri-
pod such as the American Audio
®
SPS-1b speaker stand.
5. StACkIng notCHeS –
These notches are designed to line up with the rubber feet of another
XSP-A Series and are used to support another speaker when they are stacked together.
6. RIggIng PoIntS –
The XSP-A Series speaker has three rigging points. These points are to be
used to “fly” or suspend the speaker in the air by some means. be sure to follow the “flying”
outlines on page 17.
7. tRAnSPoRt HAndle –
The XSP-A Series speakers come with built-in heavy-duty transpor-
tation handle. Use this handle for secure and easy transportation.
8. Pole MoUnt loCkIng bolt –
This pin is used to secure the speaker in place when mount-
ing the speaker in a pole mount configuration. Always be sure to tighten down on the locking
bolt to prevent the speaker from shifting during use.
1
6
4
6
5
2
3
7
8
3
