(1) POWER SWITCH - Red LED will light when power is ON.
(2) MASTER LEVEL - Dual LED's show the level of the left and right master output.
(3) GAIN CONTROL - Used to set the level of the output signal for its designated channel.
(4) BASS/MID/TREBLE CONTROL - Used to increase or decrease the LOW's, MID’s, and HI’s of the output signal.
The Q-2422 features "Rotary Kills" with -35dB to +15dB output control.
(5) PHONO/AUX/LINE SWITCH - Used to select the input to be sent to the individual channel. Channels 1 and 2 may
be switched PHONO/AUX or LINE. Channel 3 may be switched LINE 3 or LINE 4. The selectors for AUX1/PHONO1
and AUX2/PHONO2 are on the rear panel (29).
(6) CHANNEL FADER - Used to adjust the output level of each channel.
(7) CUE BUTTONS - Engage the CUE button to monitor the assigned channel.
(8) FEATHER FADER™ CROSSFADER - Mixes the signals of the assigned channels. To assign channels use the
ASSIGN SWITCH (17) located on either side of the crossfader. When the crossfader is set in the center position, both
assigned channels can be heard at once.
(9) ON/OFF “Q” START- Start and stop the CD Player with the slide of the fader. The ON/OFF “Q” START (9) switch
activates this FADER “Q” START feature. When in the ON position, the FADER “Q” START allows the signal to return
automatically to preset digital CUE POINTS on your American DJ CD Player* (* also featuring FADER “Q” START). For
example, each time you slide the crossfader to far left, the CD Player will be triggered to play the song from the begin-
ning of the preset CUE POINT. Refer to your American DJ CD Player User Manual for setting CUE POINTS. Turn the
ON/OFF SWITCH (9) to the OFF position to disengage the “Q” Start function and resume to a normal fader.
(10) TALKOVER SWITCH - While in the ON position the microphone can be used at any time, while this will not attenu-
ate any other channels. When the switch is in the TALKOVER position, the microphone is hot, meaning that when the
microphone is in use all channels attenuate -15dB except the MIC. When the microphone is not being spoken into all
channels return to normal . In the OFF position, all signals return to their original level and the microphone is off.
Functions (Front Panel)
1
2
4
6
3
5
7
8
10
12
14
15
16
18
11
9
17
19
20
21
23
24
22
13
American DJ
®
AUDIO • Q-2422 User Instructions page 5
