©
American Audio
®
- www.americanaudio.us - MX-1400 DSP Instruction Manual Page 24
Model: MX-1400 DSP 4 Channel Mixer
poWer suppLY:
AC 115v~60hz/230v~50hz, User Selectable
Single Voltage:
AC 100V, 50/60hz (Japan);
AC 110V, 60hz (Colombia)
AC 120V, 60hz (U.S.A. and Canada);
AC 127V, 60hz (Mexico)
AC 220V, 50hz (Chile and Argentina);
AC 240V, 50hz (Australia)
AC 220V, 60hz (Philippines and korea)
AC 230V, 50hz (Europe, U.k., New Zealand, South Africa, and Singapore)
diMensions:
320mm (W) x 357mm (D) x 106mm (h)
12.6” (W) x 14” (D) x 4.17” (h)
WeiGht:
13.8 Lbs. / 6.3 kgs.
crossFader:
Feather Fader Plus - VCA detecting fader start control -
Low grounding impedance crossfader
poWer consuMption:
33W
headphone iMpedance:
16 Ohms
operatinG teMperature:
5 to 35 deg. C; humidity: 25 to 85% Rh
(non-condensing); Storage Temperature: -20 to 60 deg. C
input/Output impedance & Sensitivity:
(Eq Flat, Maximum gain, FX Off, Load = 100k OhM)
Line:
20k OhM / -14dbV +/-0.1db (200mV)
auX:
47k OhM / -14dbV +/-0.1db (200mV)
phono:
47k OhM / -54dbV +/-0.1db (2mV)
Mic:
10k OhM / -54dbV +/-0.1db (2mV)
rec:
1k OhM / -10dbV (316mV) +/-2db
Master unbaL.:
1k OhM / 0dbV (1V) +/-2db
Master XLr (load=600 ohM):
600 OhM / +4dbm (1.23V) +/-2db
booth (load=600 ohM):
600 OhM / +4dbm (1.23V) +/-2db
diGitaL out (load=75 ohM):
75 OhM / -/-2db, 0.5 +/-0.1V P-P
phones (load=32 ohM):
33 OhM / 0dbV (1V) +/-2db (Cue Mixing at center)
Maximum input:
(1khz Input, Master Output ThD=1%, Eq Flat, FX Off, Maximum gain)
Line, auX:
MORE ThAN +4dbV
phono:
MORE ThAN -36dbV
Mic:
MORE ThAN -36dbV
Maximum Output:
(Eq Flat, Maximum gain, FX Off, ThD=1%)
Master:
MORE ThAN +18dbV (8.0V)
rec:
MORE ThAN +8dbV (2.5V)
phones:
(LOAD=32 ohms)
MORE ThAN +3dbV (1.4V)
Output Noise:
(Maximum gain, Eq Flat, W/20khz LPF, A-Weighted, FX OFF)
Line, auX:
MORE ThAN 80db
phono:
MORE ThAN 66db
Mic:
MORE ThAN 64db
channeL baLance:
WIThIN 3db
Frequency response:
(Eq Flat, Maximum gain, FX Off)
Line/auX:
20 - 20khz +/-2db
phono:
20 - 20khz +2 /-3db (RIAA)
Microphone:
20 - 20khz +2 /-3db
ThD - Total harmonic Distortion:
(Eq Flat, Maximum gain, FX Off, W/ 20khz LPF):
Line, auX:
LESS ThAN 0.04% 20 - 20khz
phono:
LESS ThAN 0.15% @ 1khz (A-Weighted)
Mic:
LESS ThAN 0.15% @ 1khz (A-Weighted)
cross taLk:
Maximum gain, Eq Flat, Master Output)
Line, auX, phono:
More Than 65db @ 1khz between L and R, and Channels
More Than 70db @ 1khz between Channels
MX-1400 DSP
SPECiFiCaTiONS
